User manual LG LMVM2085ST

[. . . ] Proper installation is your responsibility. Make sure you have everything necessary for correct installation. Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner. Free movement of air in room to be cooled. [. . . ] Adequate wall support for weight of air conditioner. Air conditioner weights between 70 and 85 Ibs (32 to 40 kgs). NOTE: Do not use an extension cord. Air must be able to pass freely through the cabinet louvers. (FIG. 1) Window Installation: Window opening measurements (FIG. 2) : FIG. 1 A FIG. 2 A. Cabinet louvers Remove packaging material: Remove and dispose of / recycle packaging materials. Remove tape and glue residue from surfaces before installing the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner. 1 Remove the air conditioner from the carton and place it on cardboard. Remove 1 shipping screw from each side of the cabinet (FIG. 3). Remove front panel by removing 1 Phillips screw from each side of the front panel. Trim the weather seal 4 Installation Instructions Complete Installation: 1. Insert window sash seal behind the top of the lower window sash and against the glass of the upper window (FIG. 15). Place the window-lock bracket on top of lower window and against upper window sash on right side of the window (FIG. 15). round-head screws to secure window in place (FIG. 15). Insert air conditioner into cabinet (FIG. 16). Insert front tabs of front panel into top of cabinet and swing front into place. Attach bottom front of panel with front panel screws (FIG. 17). Window sash seal FIG. 15 B C A D Through-the-Wall Cabinet Installation: Option 1--wood, metal or plastic molding: When using a wood, metal or plastic molding, the wood frame should line up with the inside wall as shown FIG. 18. Option 2--Plastered wall with no molding: into the inside wall FIG. 19. FIG. 18 ABC AB FIG. 19 FIG. 20 C D D A B D C C. Measure the outside width and height of frame to determine wall opening dimensions. The wall opening measurements should be : 3. [. . . ] Apply the wood preservative to the outside exposed surface. Attach frame securely to the wall. 5 Installation Instructions FIG. 21 A NOTE: Dimension for depth depends on wall thickness and type of molding (FIG. 21). Do not block louvers in air conditioner cabinet. Outside height B C Install Cabinet into Wood Frame: 2. [. . . ]