User manual LG LN555

[. . . ] ENGLISH Portable Navigation OWNER'S MANUAL 550/555 Series Please read this manual carefully before operating your Navigation device. Designs and specifications are subject to change without prior notice for improvement. Table of contents Safety note Supplied parts Part names 5-11 12 13-14 Front panel . . 14 Connecting devices 15-22 Installation sequence for the suction-cup mount . . 15-16 Detaching the suction-cup mount . [. . . ] POI items are categorised to let you locate them more easily. On this screen you can see the first page of the top level POI categories. Find in POI subgroups : Highlight one of the POI groups by tapping or using the direction buttons, then tap it again to see the list of subgroups. Using the same action you can move deeper into subgroups. Search by name among the POIs of that level : Tapping the "Search" button will bring up a text input screen to let you narrow the list of POIs. If you tap "Search" in the list of subgroups, you will only search in the group you are already in. See all POIs of the current group in a list : Tapping the "All" button opens the list of all points in the group or subgroup you are already in. Search results are ordered by their distance from the given reference point (nearest first). Tapping "OK" will return to the map with the selected POI in the centre. 42 Search for a location The search will be carried out around a certain reference point. Always look at the current reference point shown in the blue field above the POI category buttons and confirm that it matches what you want. To change the reference, tap the "Change ref. " button in the top right corner. Once you tap the "Change ref. " button, you are presented with these choices. Address : You can specify an address to be searched, or a settlement to search in. The centre of this settlement will be used as the reference point. History : The reference for the search can be selected from the History list. Coordinates : You can specify a latitude/longitude pair to be the centre of the search. Current GPS : The search will be carried out around the current location given by the GPS if it is available. If no GPS position is available, the last known GPS position will be used. Cursor : The search will be carried out arround the previously selected map point. Destination : The search will be carried out arround the destination of your current route. Once you have set the reference point, you have the following potions on the "Find POI" screen. 43 Search for a location Find My POI · Search : You can shorten the list of matching POI items by filtering. Just like in Find, enter a few letters of the desired POI name. [. . . ] Delete all the data within the memory and reinstall the data. If the problem persists after the installation, contact the Customer Service Center. Map data and dangerous area information are not updated. You must periodically update the map data. Refer to the homepage for details on how to update the data. The path guide can be different from the actual path. (Path guide error) · · · · · · · When the road is closely parallel. [. . . ]