User manual LG LP-C1008FA0

[. . . ] Instead, they are requested to directly contact a designated service center or the outlet at which the product was purchased. x Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center. x Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. [. . . ] (ON/OFF) button one time and then select the desired Then select. . . (STANDARD) mode (NATURE) mode (POWER) mode (SAVING) mode (SILENCE) mode To obtain a(n). . . Normal operating Reducing the uncomfortable temperature gradually High fan speed Compressor run time reduced Fan speed reduces as the temperature decreases MCC2 To obtain a(n). . . Normal operating Reducing the uncomfortable temperature gradually High fan speed Compressor run time reduced Fan speed reduces as the temperature decreases Then select. . . (STANDARD) mode (NATURE) mode (POWER) mode (SAVING) mode (SILENCE) mode 2 To stop the operating, press the turn off. Note (ON/OFF) button until all indicators Even if the air conditioner has been turned on via the ON/OFF button on the unit, operations can still be controlled using the remote control as usual. Selecting with the Remote Control To select the 5 Way function with the remote control, press the 5 Way button one or more times until the desired mode is selected. x Each time you press the 5 Way button: MCC2 Each 5 Way indicator on the indoor unit lights up in order. Selecting the Automatic Operating Mode You can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically. You can adjust the standard temperature but not the fan speed. 1 If necessary, press the Result: (On/Off) button. x The 5 Way indicator on the indoor unit lights up. x The air conditioner starts up in the mode selected when the unit was last used. Result: x The indoor unit beeps each time you press the MODE button. You can change modes at any time. Note 3 Select the fan speed by pressing the FAN button one or more times until the required setting is displayed: Low Medium High Result: Each time you press the FAN button, the indoor unit beeps. 4 To control the direction of the air flow, refer to page 15. E-14 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner. 1 Press the SWING button one or more times as required. Result: The outer blade is adjusted vertically. Upwards. RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the SWING button. Result: The blade move up and down, around the base position set. 3 To stop the blade moving up and down, press the SWING button again. Set to the initial position powered. Note Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. The design and shape are subject to change according to the model. E-15 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 To set the operating time, press the ON TIMER button one or more times until the required time is displayed. [. . . ] The air conditioner operates normally. E-18 Operating Recommendations ENGLISH Here is a recommendation that you should follow when using your air conditioner. Topic Power failure Recommendation If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns, B1 B2 C2 Note you must press the button to restart it. (ON/OFF) the air conditioner starts up again automatically Be sure which model you have purchased because some air conditioners do not restart automatically. E-19 Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. [. . . ]