User manual LG LP-XG2

[. . . ] WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. CAUTION This symbol indicates information that, if ignored, could result possibly in personal injury or physical damage due to incorrect handling. Please refer to the pages written following this symbol. NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual. [. . . ] To perform reset, point at RESET using the button . (24) Performing this item resets the filter timer which counts use time of air filter. See the item FILTER TIME of section OPTION menu. (39) Using the buttons / switches the language of menu. See the item LANGUAGE of section SCREEN menu. (35) Pointing at the "Go To Advanced Menu" and pressing the button changes the EASY MENU into the Advanced MENU. (22) Performs to use the menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. RESET FILTER TIME LANGUAGE Go To Advanced Menu 26 Multifunctional settings PICTURE menu With the PICTURE menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item BRIGHT CONTRAST Description Using the buttons / adjusts the brightness. : Using the buttons / adjusts the contrast. : Light Dark Strong Weak GAMMA #1 #2 #3 MENU [RGB] :SELECT PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU BRIGHT +0 CONTRAST +0 GAMMA DEFAULT 1 HIGH COLOR TEMP COLOR +0 TINT +0 SHARPNESS +0 PROGRESSIVE TURN OFF MY MEMORY SAVE 1 Using the buttons / switches the GAMMA mode. In such a case, please select the TURN OFF, even though the screen image may lose the crisp. Choosing a mode of MY MEMORY using the buttons / and then pressing the button or the ENTER button performs each function. LOAD1 LOAD2 LOAD3 LOAD4 SAVE4 SAVE3 SAVE2 SAVE1 This projector has 4 numbered memories for adjustment data. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the memory whose number corresponds with the command's number, and adjusts the picture automatically depending on the data. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment data on the memory whose number corresponds with the command's number. PROGRESSIVE MY MEMORY 29 Multifunctional settings IMAGE menu With the IMAGE menu, items shown in the table below can be performed. Choose an item using the cursor buttons / on the projector or remote control, and press the cursor button on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item Description Using the buttons / switches the mode for aspect ratio. At a RGB signal 4:3 16:9 NORMAL At a video signal / no signal 4:3 16:9 · The NORMAL mode keeps the original aspect ratio of the signal. · At a HDTV component video signal of 1125i (1080i) or 750p (720p), this item can't be chosen. · Performing the automatic adjustment initializes the aspect ratio setting. Using the buttons / adjusts the over-scan ratio. [. . . ] After the treatment, resent the power to ON. NOTE · When the interior portion has become overheated, for safety purposes, the power source is automatically turned off, and the indicator lamps may also be turned off. In such a case, press the "" (OFF) side of the power switch, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover, and then turn the power on again. 49 Troubleshooting Phenomena that may easily be mistaken for machine defects WARNING Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. In such cases, immediately turn off the power switch and then disconnect the power plug from the power outlet. [. . . ]