User manual LG LP-XG24

[. . . ] select the channel you Switch on your TV and described earlier in this channel on your TV as VCR and tuned a video correctly installed your 13 How to use the Shuttle Ring TO ADVANCE THE TAPE RAPIDLY Press the "STOP" button and turn the "SHUTTLE RING" clockwise. TO REWIND THE TAPE Press the "STOP" button and turn the "SHUTTLE RING" counterclockwise. TO VIEW THE PICTURE DURING FAST FORWARD MODE OR REWIND MODE Hold down the "SHUTTLE RING" clockwise during fast forward, and counterclockwise during rewind. Press STOP to end Slow motion playback, playback. [. . . ] You can reach the following playback speeds. (-7xplay, -3xplay, -play, -1/19 slow, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture accordDurito the status of tape. If distortions can be seen in the picture, reduce them with D or E. If the end of the tape is reached, your VCR will stop playback automatically, rewind, stop, eject the tape and place itself into power off. CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). OPR (Optimum Picture Response): This feature automatically improves playback picture quality by adjusting your VCR to the condition of the tape. Press OK Press EJECT. Repeatedly press CM SKIP to skip material: 1 Press 30 seconds 2 Press 60 seconds 3 Press 90 seconds 4 Press 120 seconds 5 Press 150 seconds 6T*[(5 Press)-1880 seconds 17 Press i. Press OK. Use the numbered buttons on the remote control to alter or enter the HOURS, MINUTES, DAY, MONTH and YEAR. Try another channel, maybe a weak signal. Check aerial, is the lead broken or damaged?Have you tuned in a video channel on your TV to watch video on?If you have used a SCART lead to connect your VCR and TV have you selected the AV channel on your TV?Check tuning, carry out Automatic Tuning again Check points Is the cassette compartment empty?Are you trying to insert the cassette the right way round? Is the mains plug plugged in and switched on?Is the VCR switched on Check the bart ries in remote control. Is the video cassette damaged, have you tried using another one? [. . . ] Is the video cassette damaged, have you tried using another one?Adjust the horizontal control on your TV. Check aerial, is the lead broken or damaged? Are the TV channels tuned in properly? [. . . ]