User manual LG LRFD22850

[. . . ] WARRANTY PERIOD: REFRIGERATOR/FREEZER LABOR: One Year from the Date of Purchase. PARTS: One Year from the Date of Purchase. SEALED SYSTEM (Compressor, Condenser, and Evaporator) LABOR: One Year from the Date of Purchase. PARTS: Seven years from the Date of Purchase. [. . . ] Use special care when removing them to avoid dropping them. Adjusting Shelves Remove shelves from the shipping position and replace shelves in the position you want. · To remove a shelf--Tilt up the front of the shelf in the direction of (1) and lift it in the direction of (2). w CAUTION: Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilling food. Sliding Out Shelves You can slide glass shelves in and out of your refrigerator as follows. · To slide the shelf out, carefully pull front of shelf toward you. · To slide shelf in, push shelf in until it stops. WINE HOLDER Bottles can be stored laterally with this wine holder. It can be attached to any shelf. · To replace a shelf--Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks drop into the slots. Wine holder can be removed by pulling it straight out and installed by placing it at the end of the shelf you want and pushing it inward. 18 USING YOUR REFRIGERATOR OPTIBIN CRISPERS 2 u Crispers with rails To remove crisper: 1. Lift the front of basket up and pull straight out. 1 The Optibin Crispers provide fresher-tasting fruit and vegetables by letting you easily control humidity inside the crisper. The Optibin Crispers include: 1) a humidity control knob at the front of the crisper cover and 2) a large lattice on the inner surface of the cover to hold or release moisture. CRISPER HUMIDITY CONTROL You can control the amount of humidity in the moisturesealed crispers. Set control level to cold to provide normal refrigerator temperature. Use the colder setting for meats or other deli items. NOTE: Cold air directed to the Glide N Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted. To remove Glide N Serve: Tilt up the front on it 's closed position and pull straight out. w WARNING: Fruits and vegetables may be damaged at the coldest setting. If they are frozen, they can be broken and cause personal injury. MODULAR DOOR BIN The door bins are removable for easy cleaning and adjusting. To remove the bin, simply lift the bin up and pull straight out. To replace the bin, slide it in above the desired support button and push down until it stops. To replace Glide N Serve: 1. Push metal rails to the back of the refrigerator. Place drawer onto rails and slide drawer back until it falls into place. w WARNING: Somebody can be hurt if door bins are not firmly assembled. w NOTE: DO NOT adjust a bin that is loaded with food. [. . . ] Door left open. u Wait 24 hours after hook-up for ice production. See the Setting the Controls section on page 15. u Check to see if something is holding the door open. Smaller cube size level is selected. Water shutoff valve connecting refrigerator to water line may be clogged. [. . . ]