User manual LG LRFD25850WW

[. . . ] D It is recommended to contact a service center directly. hen opening or closing the front panel, use a stable stool and W watch your steps carefully. ever spill any kind of liquid on the air conditioner. N If this happens, unplug or turn off the air conditioner and contact an authorized service center. o not insert anything between the airflow blades to prevent damage D DURING OPERATION of the inner fan and consequent injury. [. . . ] E button: Result: ach time you press the - The temperature is adjusted by 1°C - The indoor unit beeps f the room temperature reaches 5°C higher than the set I temperature, the air conditioner stops heating, but the fan operates consistently. f the room temperature reaches 3°C lower than the set I temperature, the air conditioner starts heating again. 4 Press the displayed. button to select the fan speed until the required settingis Automatic (rotated : Low Medium High Maximum ) Result: Each time you press the button, the indoor unit beeps. or the first 3~5 minutes, the fan may not operate to prevent F the cool air from running out of the indoor unit. It helps to warm the air in your room sufficiently. 5 To control the airflow direction, refer to pages 16 and 17. E-11 AQ30_36W_IB_E_28061A. indd 11 2007-6-20 13:05:32 Selecting the Dry Mode You can select the Dry mode if you want to dehumidify your room. You can adjust the temperature in this mode. 1 If necessary, press the (On/Off) button. Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of theremote control to select the mode in advance. T Result: he air conditioner operates in the selected mode when it is turned on. Note If you don't use the remote control after setting the On Timer, it turns off automatically after 25 hours. To Cancel the On Timer 1 Press the Note button to cancel the On Timer. button, both the On Timer and the Off Timer E-18 AQ30_36W_IB_E_28061A. indd 18 2007-6-20 13:05:43 Setting the Off Timer ENGLISH You can set the Off Timer to turn off the air conditioner automatically at the appointed time. You can set the time from 1 hour to 24 hours. 1 Press the button until the required time is displayed to set the Off Timer. You can set the time between 1 hour and 24 hours. 2 Press the button to complete the setting. Result: The remaining time is displayed. The air conditioner turns off automatically at the appointed time and the Off Timer setting disappears. Example If you would like to turn the air conditioner on after 2 hours and to operate it for 2 hours: 1. Press the button until `2. 0 Hr' is displayed. Press the button until `4. 0 Hr' is displayed. [. . . ] Note Even if you turned the air conditioner on with the On/Off button, you can control it with the remote control. 2 E-23 AQ30_36W_IB_E_28061A. indd 23 2007-6-20 13:05:50 Troubleshooting Guide Before contacting the service center, check the following. It will save your time and theexpense of an unnecessary call. Problem The air conditioner does not operate. Explanation/Solution Check if the circuit breaker of the air conditioner is switched on. [. . . ]