User manual LG LRNU12GSER0

[. . . ] ⷠDo not use any combustible equipment in front of the airflow outlet. ⷠDo not expose directly to cold air for a long period. Switch off the power supply before cleaning or servicing. ⷠTurn off the power supply if the unit is not used for a long period of time. [. . . ] outdoor Unit · Do not sit, step or place anything on the unit. ⷠAfter long periods of use, make sure the installation rack is not damaged. Do not share the same power outlet with other equipment. ⷠDo not modify power cords. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. ⷠThis equipment must be earthed and strongly recommended to be installed with Earth Leakage Circuit Breaker (ELCB) or Residual Current Device (RCD). Otherwise, it may cause electrical shock or fire in case of malfunction. ⷠIn case of emergency or abnormal conditions (burnt smell, etc), turn off the power supply, and consult your nearest dealer. outdoor Unit · Do not insert your fingers or other objects into the unit. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. To turn ON or OFF the unit at a preset time. When ON Timer is set, the unit may start earlier (up to 30 minutes) before the actual set time in order to achieve the desired temperature on time. If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is . For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. tO ADJUST AIRFLOW DIRECTION (5 OPTIONS) , · Keeps the room ventilated. In heat mode, the air blows horizontally for a while, then starts to blow downwards and the airflow louvers start to swing left/right after the temperature rises. Set the temperature 1°C higher in cool mode or 2°C lower in heat mode than the desired temperature to achieve a 10% power saving. Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. Switch off the power supply before cleaning. ⷠDo not touch the aluminium fin, sharp parts may cause injury. hINTS · Clean the filter regularly for best performance and to reduce power consumption. [. . . ] Air filters cleaning is needed every two weeks. Dry the filters thoroughly under the shade, away from fire or direct sunlight. Wipe the unit gently with a soft, dry cloth. After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: 8°C Heating: 14°C TURN OFF POWER SUPPLY then CALL Authorized Distributor under the following conditions: · Activate Heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly. [. . . ]