User manual LG LRNV126SRA0

[. . . ] Keep children away from the unit. 5 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 6 Do NOT attempt to repair the unit yourself. If it is damaged in any way, contact: x An authorized service center x The dealer from whom you purchased the air conditioner. 7 Do NOT place any blocking objects in front of the unit. 8 If the remote control will not be used for a long time, remove the batteries. [. . . ] Result: x Each time you press the or buttons: - The temperature is adjusted by 1°F - The unit beeps x The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 24. E-11 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You can select the On timer only when the air conditioner operates in the Cool mode. 1 Check that the air conditioner has been switched off; if necessary, press the (On/Off) button. 2 Set the operating time by pressing the button on the unit one or more times until the desired time is displayed. The operating time can be set between 1 and 24 hours. Result: x Each time you press the button: ­ The time is adjusted by 1 hour and displayed on the control panel ­ The unit beeps x The operating time is displayed and decreases automatically to indicate the remaining time. x The air conditioner starts up in the Cool mode automatically when the operating time reaches zero. You can select the fan speed, temperature, air flow direction and Energy saving mode after setting the On timer mode. However, when you change the mode, the On timer and Off timer mode is canceled. To Cancel the On Timer 1 To cancel the timer, press the until "--" is displayed. button on the unit one or more times 2 Press the (On/Off) button on the unit. The air conditioner operates in the mode selected when the unit was last used. E-12 Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. Possible temperatures are between 64°F and 86°F inclusive. Result: x Each time you press the buttons: - The temperature is adjusted by 1°F - The unit beeps x The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 24. E-19 Setting the On Timer The On Timer enables you to switch on the air conditioner automatically after a given time. You can select the On timer only when the air conditioner is off. You can select the On timer only when the air conditioner operates in the Cool mode. 1 To set the operating time, press the button one or more times until the required time is displayed. Possible time is between 1 hour and 24 hours inclusive. 2 Press the Result: (Set/Cancel) button to complete the setting. x Blinking of the timer indicator stops. x The air conditioner will switch on automatically when the counter displayed on the remote control reaches the set time and disappears the On timer setting. You can select the temperature, Energy saving mode after setting the On timer mode. To Cancel the On Timer 1 Press the (Set/Cancel) button. If you want to turn on the air conditioner before the timer reaches the setting time, press the (On/Off) button. E-20 Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given time. You can select the Off timer only when the air conditioner is on. [. . . ] x x x x Check that the correct operating mode has been selected(Cool). Dust may be blocking the air filter; refer to page 26 for cleaning instructions. Check that there is no obstacle blocking the air flow into or out of the unit. The air conditioner does not operate with the remote control No beep is heard when you press the (On/Off) button on the remote control The air conditioner does not cool The timer is not correctly triggered Odors are permeating the room during air conditioning x Check that the timer has been programmed correctly; refer to page 12~14, 20~22. x Ventilate the room. Technical Specifications Design and specifications are subject to change without notice. [. . . ]