User manual LG LRSC20911TT

[. . . ] Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . oPeration Selecting Auto Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Cool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Heat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select or mode. The indoor unit beeps each time you press the The air conditioner runs in cool or heat mode. button. 3 Press the button. - The remote control display shows you that this mode automatically stops after 8-hour operation. - In the case of adjusting time Press the to 1 hours. Press the Result: button to adjust desired operation time from 30 minutes mode will automatically stop after the set time. button. In the case of adjusting the extra time for mode, you should press the button within 10 seconds. If you do not press the button within 10 seconds. mode will automatically stop in 8-hour operation. 4 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 61°F(16°C) and 86°F(30°C). set to the default position. Adjusting the Airflow Direction Horizontally You can adjust airflow direction horizontally manually. The inner blades with small fins move the air in the desired direction. 1 Adjust the inner blades by moving them left or right. Make sure do not touch the inner blades during operation. It may cause injury on your fingers. E-1 Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button until the desired time is displayed to set the On Timer. You can set the time between 0. 5 hour and 4 hours. 2 Press the Result: button to complete the setting. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 3 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: The air conditioner operates in the selected mode when it is turned on. To Cancel the On Timer If you no longer wish to use the On Timer that you have set, you can cancel it at any time. 1 To cancel the On Timer, press the timer setting disappears. button one or more times until the 2 Press the Note button. If you want to turn on the air conditioner before the timer reaches the setting time, press the button. E- Setting the Off Timer ENGLISH You can set the Off Timer to turn off the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button until the desired time is displayed to set the Off Timer. You can set the time between 0. 5 hour and 4 hours. Press the Result: button to complete the setting. [. . . ] They may save you the time and expense of an unnecessary call. Problem The air conditioner does not operate at all. The air conditioner does not operate in the HEAT mode. The cool(warm) air does not come out from the air conditioner. [. . . ]