User manual LG LS-H126PDL2

[. . . ] Inserting objects can result in injury due to the high speed rotation of internal fans. Do not connect the grounding wire to gas pipe, water pipe, lightning rod or telephone grounding wire. If anything is abnormal with the air conditioner (ex. A burning smell), stop the operation immediately and turn the circuit breaker OFF. [. . . ] The adjusted position will be memorized and will be automatically set to the same position when operated the next time. The adjustment range is narrower than the SWING range in order to prevent condensation from dripping. Manual adjustment of the louvres can cause the unit to malfunction. When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode for an extended period of time, condensation may result. Indirect air Press the INDIRECT AIR button during cooling or dry operation when you do not want to feel cold air. The vertical adjustment louvre is set downward to deliver the warm air down to the floor. Rection to make the room cool or warm rapidly. The INDIRECT AIR setting is cancelled when you press TURBO button while INDIRECT AIR is set. If you want INDIRECT AIR operation in TURBO mode, press INDIRECT AIR button during TURBO operation. Turbo operation In this operation, the air conditioner works at the maximum power and optimum louvre di- ­ The green TURBO lamp on the unit will light up. to cancel Press the TURBO button again. ­ The orange TIMER lamp on the unit will light up. ­ The unit will stop operating after one hour. ­ The orange TIMER lamp on the unit will turn off. Alternatively, turn the unit off by pressing the ON/ OFF button. ­ The red OPERATION lamp and the orange TIMER lamp on the unit will turn off. If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for an hour at the formerly set condition. If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is activated, press the ONE-HOUR OFF TIMER button again during operation. If TIMER ON and/or TIMER OFF are set, TIMER CANCEL (SET/C) button cancels every setting. Point the remote control at the receiver window on the unit and press the TIMER SET (SET/C) button. The orange TIMER lamp on the unit will light. ­ The unit will generate a beep when it receives the signal. [. . . ] The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, Your household waste disposal service or the shop where you purchased the product. [. . . ]