User manual LG LS-J0960RL

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer. Aerial Connect the aerial cable to the socket marked +75 on the back cover. For the best reception an outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto the screen. [. . . ] Only a set with eye option can perform this function. In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. Press the EYE/ * button to switch the eye function on or off. Off When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. At this time the display in green does not appear continuously but the display in yellow appears each time the picture condition changes. EYE/ Note : If you press the PSM or TURBO PICTURE button with the eye function, the eye function is automatically switched off. Turbo picture selection (option) When this function is on, the picture will be more brilliant and distinct than normal picture. Repeatedly press the TURBO PICTURE button to switch on or off. PSM PICTURE SOUND / TURBO/ (Turbo Picture off) (Turbo Picture on) Note : If you press the PSM button with the Turbo picture function, the Turbo picture function is automatically switched off. 16 Sound adjustment (option) Sound adjustment is an optional function only a set with sound adjustment can perform this function. Sound SSM AVL DBS Balance { { { { SSM (Sound Status Memory) You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer. Press the MENU button and then D / E button to select the Sound menu. Press the G button and then D / E button to select a sound setting on the SSM pull-down menu. Sound SSM AVL DBS Balance { { { { Flat Flat Music Movie Speech User ()O}{OOKOMENU { ()O}OOKOMENU Sound Frequency Adjustment a. Press the G button in User to display the User sub menu. MENU TV/AV PR VOL 0. 1O0. 5O1. 5O5. 0O10OkHz 0. 1O0. 5O1. 5O5. 0O10OkHz () OK PR () VOL ()O}{OOKOMENU ()O}{OOKOMENU (RF STEREO, Flat) (AV STEREO, Flat) b. Select a sound band by pressing the F / G button. Make appropriate sound level with the D / E button. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II/ button repeatedly. * 1. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 19 Time Setting Time Clock OffOtime OnOtime AutoOsleep { { { { Setting the clock 1. Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to adjust the hour. Time Clock Offotime Onotime Autoosleep { { { { -i-o:o-i- ()O}{OOKOMENU ()O}{OOKOMENU 1 4 7 MENU 2 5 8 0 3 6 9 TV/AV 4. Press the G button and then D / E button to adjust the minute. Repeatedly press the MENU button to return to normal TV viewing. Setting the On/Off timer By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time function. [. . . ] Store the VCR channel on the programme number 0 using the `Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. VCR ANT IN LL Y PB PR DVD INPUT (480i) OUT AV VIDEO IN (L/MONO) AUDIO (R) COMPONENT Audio/Video in/out sockets (option) 1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. [. . . ]