User manual LG LS-P1260BD

[. . . ] ENGLISH Room Air Conditioner OWNER'S MANUAL BE01 · Please read carefully and thoroughly this manual before operating this unit. · Contact the authorized SVC man for repair or maintenance of this unit. · Contact the installer for installation of this unit. · The appliance is not intended for use by young children or infirm persons without supervision. [. . . ] The unit will respond with a beep. Operating Instructions 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Auto Healthy Dehumidification Heating (Heat pump model only) Care and Maintenance 3 The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, close the door on the remote control and press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will then be changed automatically. To raise the temperature Troubleshooting Tips To lower the temperature During Auto Operation: You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule. If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be done by manually resetting. During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again. 7 Safety Precautions Healthy Dehumidification Operation 1 Press the Start/Stop button. The unit will respond with a beep. Operating Instructions 2 Open the door on the remote control. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Auto Healthy Heating Dehumidification (Heat pump model only) Care and Maintenance 3 Set the fan speed again with the door of the remote control still closed. You can select the fan speed in four stepslow, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. Natural wind by the CHAOS logic For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. Troubleshooting Tips 8 During Healthy Dehumidification Operation: If you select the dehumidification mode on the operation selection button, the A/C starts to run the dehumidification function, automatically setting the room temp. and airflow volume to the best condition for dehumidification based on the sensed current room temp. In this case, however, the setting temp. It is especially used to cool the room temp. But the JET COOL function is just available for cooling or dehumidification mode. In order to return to the normal cooling mode from the JET COOL mode, you just press either the operation mode selection button, airflow volume selection or temp. [. . . ] Do not let direct sunshine enter the room when the air conditioner is in operation. Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room. This is not good for the health and wastes electricity. Troubleshooting Tips Make sure that the doors and windows are shut tight. Avoid opening doors and windows as much as possible to keep the cool air in the room. Clean the air filter regularly. Ventilate the room occasionally. Since windows are kept closed, it is a good idea to open them and ventilate the room now and then. Blockages in the air filter reduce the airflow and lower cooling and dehumidifying effects. [. . . ]