User manual LG LS501P-B1

[. . . ] Color Video Camera Instruction Manual Models : LS501 Before installing, operating or adjusting this product, please read this instruction booklet carefully and completely. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] Submenu appears on the monitor. 0 Menu Operation . Use or or Use button to select a submenu option. button to select a value. to exit the setup Select [EXIT] option then press menu. In the submenu, use or button to select the [EXIT] then use or button to select a mode and press to exit the setup menu. · · · RET: Return to the previous. TOP: Return to the CAMERA SETTING menu screen. END: Exit the setup menu. Notes: · · · · · button: Use to move upper direction on the menu screen. button: Use to move lower direction on the menu screen. button: Use for decrease the value of the option. button: Use for increase the value of the option. button: Executes selections and displays a submenu for an item with the mark. 1 Camera Identification Settings You can use the camera identification (CAMERA ID) to assign a number to the camera. Select [CAMERA ID] option on the [CAMERA SETTING] menu. . Use or 1~55). to select a CAMERA ID (OFF, Exposure settings Exposure mode setting BACKLIGHT setting Backlight compensation increases the exposure level when the camera picture is darkened by the strong background light. · or button to select a mode then press BLC: Set the BLC limit. - BLC LEVEL: LOW y MIDDLE y HIGH Exposure settings · HSBLC: Use for adjusting brightness the specific area of picture. The HSBLC mode is automatically activated only in low illuminance scene. - AREA SETTING: Use or button to select a area then use or button to select a ON or OFF. - GRAY SCALE: Use or button to select a gray scale. - USER SCALE: Use or button to select a bright level. (5 level) - MASK: Use or button to select [ON] or [OFF]. If you set the MASK to ON, the mask function is activate only when the HSBLC is activated automatically in a low-light condition. BRIGHTNESS setting You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the image gets bright. [. . . ] Use or button to change a adjust the option. If you set the sharpness value to higher, the image outline becomes sharp. If you set to lower value, the image outline becomes dim. This function is useful for outdoor surveillance. [. . . ]