User manual LG LSL121N-1

[. . . ] 19 Nettoyage du filtre sortie moteur What to do if your vacuum cleaner does not work . This guide do not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC Directives : 2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive. [. . . ] Improper repairs may lead to serious hazards for the user. D •  o not put fingers near the gear. Do not use it if it T is damaged, cut or punctured. Failure to do so could result in death, or electrical shock. Close attention is D necessary when used by or near children. personal injury or product damage could result. 5 IMPORTANT SAFETY INSTRUCTIONS CAUTION •  o not put any objects into openings. d Failure to do so could result in product damage. •  o not use with any opening blocked: keep free of D dust, lint, hair, and anything that may reduce air flow. failure to do so could result in product damage. •  o not use vacuum cleaner without dust tank and/or D filters in place. failure to do so could result in personal injury or product damage. •  o avoid personal injury and to prevent the machine T from falling when cleaning stairs, always place it at the bottom of stairs. failure to do so could result in personal injury or product damage. •  his appliance is not intended for use by persons T (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Thermal protector : This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner still does not run, contact a qualified electrician. [. . . ] Press the pedal ( •  ard floor position (tiles, parquets floor) H Press the pedal ( ) Press the pedal to lift the brush up. Appuyez sur la pédale ( •  leaning carper and floor nozzle C •  ettoyer la brosse sols durs et moquettes N •  lean the hole and C brush of the nozzle. ) 13 How to use Using all floor nozzle and mini turbine nozzle Manipulation Utilisation de la brosse Turbo-combi et la brosse mini turbine Carpet TapisPedal Pédale- Floor Sol- ➌  ll floor nozzle (depend on model) A La brosse Turbo-combi (selon le modèle) •  he 2 position nozzle T This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. •  arpet or rug position C ), then brush is will rotate Press the pedal ( •  ard floor position H ), then brush will stop rotating Press the pedal ( •  a brosse Turbo-combi L est munie d’une pédale qui vous permet de modifier sa position en fonction du type de sols. [. . . ]