User manual LG LST-250F

[. . . ] Then go through the rest of this guide and check mark that feature where it's noted. p Automatic Line Selection (ALS): For outgoing calls: You p p p have ALS if you hear dial tone and the Line LED lights steady green when you lift the handset or press Spkr. Ringing Line Preference: You answer an incoming Line ringing your station by lifting the handset or pressing Spkr. Tone Signaling: Internal incoming call: you hear successive ring tones, then lift the handset or press Spkr. Voice First Signaling: Internal incoming call: your phone does not ring; instead you hear a long tone, then the caller's voice. [. . . ] Once the busy line is free, the transferred line is called back. 4 Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05 Conference Calls 1. When the called party answers, press Cnf/Trn. If it's busy or there's no answer, press Cnf/Trn again to return to the original connection. Repeat the above steps to add more lines. Note When the person who initiates the conference (master) hangs up, control transfers to the first internal station added to the conference. If no internal stations are in the conference, the call disconnects. Do steps 1 and 2 above to add the line to which you wish to transfer conference control. Announce the call and hang up to transfer the call. This station is now the conference "master" with the ability to add or delete parties. If you are the "master" conference controller, press Hold once (or twice for Executive Hold) to place the conference call on hold. The conference continues and you can join at any time without giving up "master" abilities. + Timer (seconds, 2-digits) + # Cancel: Press Ext. . . . or program a flexible button to perform the sequence See "Flexible Buttons" for instructions. 6 Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05 Call Park Orbits !While on a call, press Park in Orbit . . . or Cnf/Trn + #33 or ________ . Specify the Park Orbit using one of the following: · Press * and the system automatically selects a General Park Orbit between 7000~7019. · Press # and the system automatically selects your extension as the orbit. If the parked call is not retrieved, the call rings back to your phone. Press Park in Orbit . . . or your extension button + #32 or ________ . Enter the Orbit Number where the call is parked. Call Pickup 1. Enter a code from the following list: Group Pickup: #5#34 or ________ Directed Terminal Pickup: #5#5 or ________ Other (see System Administrator):_________ 3. Dial the extension that is holding the ringing or held call to be picked up. Echo Cancel !If you experience echo while conversing on your IP telephone, tap Vol " or # once to cancel the echo sound. Paging ! [. . . ] To enable and disable Voice Mail Call Monitor 1. Enter your voice mail password, then press #. The flashing Call Monitor button indicates that a message is being recorded in voice mail. To listen, press the Call Monitor button. [. . . ]