User manual LG LST-255

[. . . ] At the time of printing the information in this document was as accurate and current as was reasonably possible. However, in the time required to print and distribute this manual additions, corrections or other changes may have been made. To view the latest version of this or other documents please refer to the Toshiba FYI web site. Toshiba America Information Systems shall not be liable for any commercial losses, loss of revenues or profits, loss of goodwill, inconvenience, or exemplary, special, incidental, indirect or consequential damages whatsoever, or claims of third parties, regardless of the form of any claim that may result from the use of this document. [. . . ] Button is blue when application sharing is active, and gray when it is not active. Edit Mode A transmitter can change the editorial rights of the sharing application with the button on the collaboration Control Window. In the View Only Mode, only a transmitter can edit the sharing application. Both a transmitter and the recipient can be edited in Share Control Mode. At the time of the application sharing, the Edit Mode defaults to View Only Mode. The transmitter of the sharing application can also make changes to the Edit Mode by pressing the Ctrl + Alt + Shift keys. The recipient of the shared application stops the Edit Mode by pressing the Ctrl + Alt keys even if the Edit Mode is set to All. This button can be used only by the transmitter of the sharing application (Originator Only). The View only button is blue when the editorial rights are set to originator only. This button permits the application to be edited by both the transmitter and recipients of the sharing application. When editorial rights are set to All, the Share Control button is blue. Only the transmitter of a sharing application can use this button. Even if some file transmission was successful before stopping and even if when the Stop button was clicked file transmission was in the process of ending, receipt of all files on the member's side will be cancelled. Clicking the Start button starts file transmission. Although it cannot be used immediately after opening the file transmission window, it can be used if one or more files are selected in the File List Box. Note that the file remains in the File List Box after the end of a file transfer without being deleted. Select Delete Stop Start 18 Strata CIX VCS User Guide 05/09 Overview File Transfer Window Member's Screen Layout When files are transferred to a member(s), a file receiving window displays (shown right) on their screen. This window does not close automatically. This screen contains the following information: · Sender's name. · Status ­ shows the total files received. The different file transmission status are: Blank ­ Initial state when the window opens. Receiving ­ when receiving a file Aborted ­ The sender or the receiver clicked Stop during the file transfer. Connection is down ­ The connection is disconnected during a file transfer. · The progress bar under the Status shows the file reception status. [. . . ] If each of the parties have VCS installed, video communication between the second (B) and third parties (C) start. Application sharing is not inherited and would need to be restarted. Legend Video Stream App. Sharing Stream Strata CIX VCS User Guide 05/09 35 Telephone Integration Three-way Conference Call Three-way Conference Call 1. While on a call, you (A) and a second party (B) have VCS activated on your PCs. 2. [. . . ]