User manual LG LT-E2462CL

[. . . ] · It is dangerous to alter or modify the unit's characteristics in any way. · The appliance must be installed in accordance with the relevant national legislation. · Should repairs be necessary, contact the nearest authorized Repair Service Center. Unauthorized servicing can be dangerous. [. . . ] During this operation, it is normal for the noise made by the appliance to change. - In this mode, you may have to wait a few minutes before the appliance starts giving out hot air. - In this mode, the fan may operate for short periods, even though the set temperature has already been reached. Note: With high humidity conditions the display could show " Empty the internal circuit as shown in the para" graph "END OF SEASON OPERATIONS" HEATING MODE 10 Operation SMART MODE GB The appliance chooses automatically whether to operate in air conditioning, fan or heating (certain models only) mode based on the set temperature and current room temperature. To set this mode: · Press the MODE button a number of times until the SMART symbol appears. For safety reasons, when the appliance is operating in heating mode, the fan speed could differ from the set speed. BOOST FUNCTION Ideal for the summer to cool rooms rapidly. To set this mode: · Press the button. The appliance operates in air conditioning mode at maximum fan speed. While this function is selected, it is not possible to set the temperature or change fan speed. Note: BOOST function cannot be set during HEATING mode. 11 Description of the remote control DESCRIPTION OF THE REMOTE CONTROL 1 Signal transmission 2 Air conditioning symbol 3 Dehumidifying symbol 4 Fan symbol 5 HEATING symbol 6 SMART symbol 10 7 Selected temperature scale indicator 12 13 8 Temperature selected 9 SLEEP symbol 17 10 BOOST symbol 11 Fan speed indicator 26 12 AUTOFAN indicator 13 Clock 25 14 Timer 'start-up' button 15 Timer 'shut-down' symbol 24 16 ON/Standby button 17 MODE button (selects the modes) 18 FAN button 19 Increase (+) and decrease (-) temperature button 20 OK button 21 Timer 'shut-down' button 22 °C or °F selection button 23 SLEEP button 24 BOOST button 25 Timer 'start-up' button 26 Reset button (resets the appliance to the original settings) 4 6 7 9 14 16 18 19 20 21 22 23 11 15 8 USING THE REMOTE CONTROL Point the remote control at the receiver on the appliance. The remote control must be no more MAX 23 ft than 23 ft (7 metres) away from the appliance (wi MAX 7 metres thout obstacles between the remote control and the receiver). The start-up time and message ( ) flashes on the remote control display. · Press the or buttons to set the time you want the appliance to start up. · When that time is reached, press the OK button to confirm. The message ( ) appears on the remote control display and the symbol is displayed on the appliance to indicate that the timer is active. Programming shutdown · Press the button. The shutdown time and message ( ) flash on the remote control display. · Press the or buttons to set the time you want the appliance to shut down. · When that time is reached, press the OK button to confirm. The message ( ) appears on the remote control display and the symbol is displayed on the appliance to indicate that the timer is active. 15 Self-diagnosis SELF-DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions. Error messages are displayed on the appliance display. IF. . . IS DISPLAYED, WHAT SHOULD I DO? LOW TEMPERATURE (frost prevention) The appliance is fitted with a frost protection device to avoid excessive formation of ice on internal components. The appliance starts up again automatically when the defrosting process is completed. See page 18 "END OF SEASON OPERATIONS" FULL TANK (empty the internal tank) If this is displayed, contact your local authorized service centre. [. . . ] (After the unit has been on its side, oil needs to return to the compressor to ensure proper function. Without allowing the unit this time (6-24 hours) The unit may function for only a short time, and then the compressor will break down from lack of oil). This appliance is equipped with a 3 prong grounded plug. The plug must be connected into an outlet that is properly installed and grounded in the accordance with all local codes and ordinances. Do not modify the plug provided with the appliance. [. . . ]