User manual LG LT303P

[. . . ] Dome Camera Owner's Manual MODEL: LT303 Before installing and using the camera, please read this owner's manual carefully and retain for future reference. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION · · A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer 's instructions. [. . . ] Use to move lower direction on the menu screen. Use for increase the value of the option. RET/TOP/END EXIT Note: The Preset, Auto Pan, Pattern, Alarm functions could not be set on the OSD menu. To set these functions, use LKD1000 controller. FOCUS FAR Use for decrease the button value of the option. Open/Close (Enter) buttons Executes selections and displays a submenu for an item with the mark. 0 Accessing setup menus To access the setup menus using the keys on a LKD1000 controller, do the following: 1. Select CAM (Camera) icon in the main menu and then press ENTER. The camera ID input menu will be displayed. General Operation 1. Use [In] or [Out] button to select an option then press [Open] or [Close] button. Use [In] or [Out] button to select a submenu option. Use [Near] or [Far] button to select a value. Select [EXIT] option then press [Open] or [Close] to exit the setup menu. In the submenu, use [In] or [Out] button to select the [EXIT] then use [Near] or [Far] button to select a mode and press [Open] or [Close] to exit the setup menu. · · · RET: Return to the previous. TOP: Return to the CAMERA SETTING menu screen. END: Exit the setup menu. CAM CAM Please Enter Camera ID Please Enter ID : _ ID Target CAM Camera Target CAM ID : _ 2. Enter the connected camera ID to control the camera connected to the LKD1000 controller directly and then press ENTER. The camera control menu will be displayed. PRESET /CAM1 PRESET /CAM1 Focus setting Focus Mode setting 3. Press [Cam OSD] button to display the camera setup menu. The camera adjusts the focus automatically by sensing the center of the picture. Select [FOCUS MODE] option on the [FOCUS] menu, then select the following mode. · · AUTO: Auto-focus is activated automatically. ONE PUSH: The focus is activated manually. If the camera is received auto-focus command, the camera is activated Auto-focus mode and the focus is set automatically and then the focus mode is automatically changed to manual mode. [. . . ] Select [FREEZE] option on the [SPECIAL] menu. Operation 2. Use [Near] or [Far] button to set up the ON or OFF. Sharpness setting Sharpens the image outline. Select [SHARPNESS] option on the [SPECIAL] menu. 3. Use [In] or [Out] to select an option then use [Near] or [Far] button to set the option. [. . . ]