User manual LG LT723P-B

[. . . ] OWNER'S MANUAL Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LT923 Series LT723 Series P/NO : MFL66281611 2 Safety Information 1 Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Use [Near] or [Far] button to select a mode then press [Open] or [Close]. · WDR LEVEL: WDR (Wide dynamic range) feature can be very helpful to cope with very challenging lighting conditions. It is capable of capturing both of the dark part and bright part and combining the differences into a scene to generate a highly realistic image as original scene. BLC LEVEL: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas. HSBLC: Use for masking brightness of the specific area to view the subject more clearly. · HSBLC LEVEL: Select the HSBLC level. COLOR: Use [Near] or [Far] button to select a color. SHUTTER (Shutter Speed) setting Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker. Select [SHUTTER] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set shutter speed. SENS-UP setting If pictures are not clear due to darkness, use this function to increase the sensitivity of picture. Select [SENS-UP] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set the SENS-UP limit. To set the SENS-UP function, select the [AUTO] on the [SHUTTER]. · NOTE If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and [---] mark is displayed. · 4 Operation White Balance setting Select the method by which the camera shifts its output colors to compensate for the color of a light source. OFF: Not used. BRIGHTNESS setting You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the image gets bright. Select [BRIGHTNESS] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set the bright level. 1. Select [WHITE BALANCE] option on the [CAMERA SET] menu. Use [Near] or [Far] button to select a mode then press [Open] or [Close]. · ATW (Auto-Tracing White Balance): In this mode, the color temperature range for the proper white balance is approximately from 1 800 K to 10 500 K. Proper white balance may not be obtained under the following conditions: When the color temperature is out of the 1 800 K to 10 500 K range. When the scene mostly contains high color Operation 39 temperature objects, such as a blue sky or sunset. [. . . ] Select [RETURN] option and press [Open] or [Close] button to exit the setting menu. LANGUAGE Setting Select a language for the setup menu and OSD display. v 4 Operation Alarm In setting 1. Select one of the alarms in option on the [ALARM SET] menu. Use [Near] or [Far] button to set it [ON]. Select [NORMAL] option and select [Open] or [Close] option. [. . . ]