User manual LG LT903P

[. . . ] Dome Camera Owner's Manual MODEL: LT903 Before installing and using the camera, please read this owner's manual carefully and retain for future reference. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION · · A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer 's instructions. [. . . ] OFF ON COLOR LEVEL OFF/ ON 0~68 OFF/ ON OFF USER TITLE ZOOM MAG ON FUNCTION CAMERA ID ENG or ENG/CHN RET/TOP/END Menu navigation We use the LKD1000 controller in this manual to explain the features of the LG Dome camera because of the LKD1000's ability to control all of the LG Dome camera's advanced features. (For detailed controller instructions, refer to the LKD1000 Controller Manual. ) SPECIAL OSD RESET LANGUAGE INITIAL SET EXIT FACTORY RESET S/W VERSION REBOOT EXIT Buttons Cam OSD button RET/TOP/END Function Displays the setup menu or cancels operation of the setup menu. Use to move upper direction on the menu screen. Use to move lower direction on the menu screen. Use for increase the value of the option. EXIT ZOOM IN button ZOOM OUT button FOCUS NEAR button Note: The Preset, Auto Pan, Pattern, Alarm functions could not be set on the OSD menu. To set these functions, use LKD1000 controller. FOCUS FAR Use for decrease the button value of the option. Open/ Close(Enter) buttons Executes selections and displays a submenu for an item with the mark. Accessing setup menus To access the setup menus using the keys on a LKD1000 controller, do the following: 1. Select CAM (Camera) icon in the main menu and then press ENTER. The camera ID input menu will be displayed. General Operation 1. Use [In] or [Out] button to select an option then press [Open] or [Close] button. Use [In] or [Out] button to select a submenu option. Use [Near] or [Far] button to select a value. Select [EXIT] option then press [Open] or [Close] to exit the setup menu. In the submenu, use [In] or [Out] button to select the [EXIT] then use [Near] or [Far] button to select a mode and press [Open] or [Close] to exit the setup menu. · · · RET: Return to the previous. TOP: Return to the CAMERA SETTING menu screen. END: Exit the setup menu. CAM CAM Please Enter Camera ID Please Enter ID : _ ID Target CAM Camera Target CAM ID : _ 2. Enter the connected camera ID to control the camera connected to the LKD1000 controller directly and then press ENTER. The camera control menu will be displayed. PRESET /CAM1 PRESET /CAM1 Focus setting Focus Mode setting 3. Press [Cam OSD] button to display the camera setup menu. The camera adjusts the focus automatically by sensing the center of the picture. Select [FOCUS MODE] option on the [FOCUS] menu, then select the following mode. [. . . ] Select [FREEZE] option on the [SPECIAL] menu. Operation 2. Use [Near] or [Far] button to set up the ON or OFF. Sharpness setting Sharpens the image outline. Select [SHARPNESS] option on the [SPECIAL] menu. 3. Use [In] or [Out] to select an option then use [Near] or [Far] button to set the option. [. . . ]