User manual LG LV210IR

[. . . ] In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Caution: This installation should be made by a qualified service person and should conform to all local codes. Caution: To avoid electrical shock, do not open the cabinet. [. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4 LV210IR_ENG_MFL-180 7/19/07 3:04 PM Page 5 Important Safety Instructions 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. ELC: When you attach a manual or fixed lens, please put this switch in the ELC position. VIDEO: When you attach an Auto Iris lens requiring the video control signal, please put this switch in the VIDEO position. DC iris level adjustment volume 9 LV210IR_ENG_MFL-180 7/19/07 3:04 PM Page 10 Connections 3 2 Basic connection The peripheral devices (VCR, monitor, lens, etc. ), AC adaptor and cables are not supplied. Connecting the monitor Make the video signal connection between the camera and the monitor or time lapse VCR. Use a commercially available Certified/Listed, Class 2, AC 24V or DC 12V adaptor. Connect an AC 24V or DC 12V power source to the POWER INPUT terminal on the back of the camera. 1 To monitor's Video Input or Camera Input 3. Insert the plug of this power cord into a wall outlet. The POWER indicator will light. 10 LV210IR_ENG_MFL-180 7/19/07 3:04 PM Page 11 Mounting the Lens 1. Remove the lens mount cap from the camera. CS mount type lens Carefully align the lens mount with the camera opening, then turn the lens slowly to install it. C mount type lens To allow for flange- back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully align the lens mount with the camera opening and turn the lens slowly to install it. [. . . ] (NTSC : 1/100 sec, PAL : 1/120 sec) Shutter speed is auto. Internal Synchronization mode. 4 * Factory Setting 15 LV210IR_ENG_MFL-180 7/19/07 3:04 PM Page 16 Day&Night Function Settings Auto Mode The D&N function is activated automatically. Notes : · It is not necessary to connect the D&N terminal to control D&N auto function. · If you use the IR illumination, the Day and Night function may be switch again and again. [. . . ]