User manual LG LV 300P

[. . . ] All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 14. 10. 11. 12. 5 Safety Precautions Do not attempt to disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service personnel for servicing. Avoid the camera with direct sunlight Do not aim the camera at bright objects. Never face it with direct sunlight or other extremely bright objects. Otherwise blooming or smear may be caused. Do not use strong solvents or detergents Use a dry cloth to the camera when it is dirty. If it is hard to remove the dirt on the camera, use a mild detergent and wipe it gently. Handle the camera with care Do not abuse the camera. The camera could be damaged by improper handling or storage. Before operating, please check proper temperature, humidity and power source ratings. Do not expose the camera to rain or moisture Use the camera under conditions where temperature is between -10°C ~ +50°C. Do not expose the camera in such conditions as shown below. This product is designed for indoor use or location where it is protected from rain and moisture. When exposed to moisture, turn the power off immediately and ask a qualified service personnel for servicing. Moisture can damage the camera and also create the danger of electric shock. Use in a room or area filled with cigarette smoke, dust or gas. 6 What's in the box Video Cable Camera Body M4 Tapping Screws (EA) (Pan Lock Screw) Optional Adapter (DC 1V, 300mA) 7 Construction Front View Pan Base 6-pin Dip Switch Tilt Base Zoom Lever Tilting Lock Screw Focus Lever Side View Lens Tilting Lock Screw Dome Cover Separatory Spring 8 Installation Camera Installation 1. [. . . ] Smear may be caused to the screen of night than daytime. - Adjust the Focus by moving the Focus Lens. A light source such as a spot light causes burn-in on the display screen. [. . . ]