User manual LG LV 300P-C

[. . . ] Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. [. . . ] If it is hard to remove the dirt on the camera, use a mild detergent and wipe it gently. Handle the camera with care Do not abuse the camera. The camera could be damaged by improper handling or storage. Before operating, please check proper temperature, humidity and power source ratings. Do not expose the camera to rain or moisture Use the camera under conditions where temperature is between -10°C ~ +50°C. Do not expose the camera in such conditions as shown below. This product is designed for indoor use or location where it is protected from rain and moisture. When exposed to moisture, turn the power off immediately and ask a qualified service personnel for servicing. Moisture can damage the camera and also create the danger of electric shock. Use in a room or area filled with cigarette smoke, dust or gas. 4 00P-B_C. ATURALI_B_ENG. indd 4 4/14/08 9:19:1 AM What's in the box Video Cable Camera Body M4 Tapping Screws (EA) (Pan Lock Screw) Optional Adapter (DC 1V, 00mA) 5 00P-B_C. ATURALI_B_ENG. indd 5 4/14/08 9:19:48 AM Construction Front View Pan Base 6-pin Dip Switch Tilt Base Zoom Lever Tilting Lock Screw Focus Lever Side View Lens Tilting Lock Screw Dome Cover Separatory Spring 6 00P-B_C. ATURALI_B_ENG. indd 6 4/14/08 9:0: AM Installation Camera Installation 1. Aim the LG logo of the Dome Camera to face the place that you wish to watch. Tighten the M4 Tapping Screws to fix the Dome Camera on the ceiling, then adjust the Pan (Left /Right) by moving the Pan Base. Tighten the M4 Tapping Screws after adjustment. Adjust the Tilt(Up /Down) by moving the Tilt Base then tighten Tilting Lock Screw. Set the Zoom Lever to a point between "Tele" and "Wide" to choose the desired angular field of view. Set the Focus Lever to a point between "Near" and "Far" to choose the desired focus of view. Install the Dome Cover to the main body by turning it counterclockwise to the end. Hole for Fixing Notes · · When you install the camera, handle with care. The camera could be damaged by improper handling or storage. If this camera is mounted on the other places except ceiling, you need an extra bracket for mounting. (not supplied) 7 00P-B_C. ATURALI_B_ENG. indd 7 4/14/08 9:0: AM Installation Camera Connection Connect the Power Adapter (1V, 00mA; optional) to the Power Input Jack of the camera as shown below. Power Input Jack BNC Adapter Jack Power Adapter (Not supplied) Monitor 8 00P-B_C. ATURALI_B_ENG. indd 8 4/14/08 9:0:9 AM Installation NOTES: · When you disassemble the Dome Cover, lift the Dome Cover Separatory Spring on the opposite side of LG Logo and turn the Dome Cover clockwise simultaneously. [. . . ] - Adjust the Focus by moving the Focus Lens. Contrast of the screen is not clear. A light source such as a spot light causes burn-in on the display screen. [. . . ]