User manual LG LVC-SX811HP

[. . . ] FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. 2 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 3 Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. [. . . ] Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 5 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 6 Contents and Features Contents Part Names and Functions . . 21-22 Features This color video camera is designed for use in monitoring system. · High resolution and high sensitivity with a 1/3 inch Super HAD CCD (Charge Coupled Device) · CS Mount (Adapter Ring Mount for C Lens: Optional) · Line Lock when using AC24V power. · Dual power : AC 24V or DC 12V · Non-polarity DC12V Maintenance of the unit · Remove dust or dirt on the surface of the lens with a blower. · Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampended with a small quantity of neutral detergent and then wipe dry. · Avoid the use of volatile solvents such as thinners, alcohol, benzene, and insecticides. They may damage the surface of the body. 6 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 7 Part Names and Functions 1. Camera mounting bracket The bracket can be fixed at the top or bottom of the camera. Lens mount cap The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens. Flange-back adjustment dial 7 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 8 Part Names and Functions 5. Power indicator Comes on when the power to the camera is on. Power input terminal AC 24V / DC 12 V input terminal. This camera must always be operated a AC 24V / DC 12 V Certified/Listed, class 2 power supply only. D&N connector for manual day setting (See page 16) 8. D&N connector for manual night setting (See page 16) 9. Lens iris output connector (LENS) This 4- pin connector is used to send the Iris control signal and power supply to an auto-iris type lens. 8 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 9 Part Names and Functions 10. Video output connector (BNC type) Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. Function switches for manual setting To set functions, use these dip switches. [. . . ] Caution: Tightening the screw by force will cause damage to the screw or deviation of focus. Note: The object may be out of focus when using a source of near-infrared light than using the visible light. flange-back fixing screw flange-back adjusting ring 19 LVC-SX811HP_ENG_MFL-180 7/19/07 3:04 PM Page 20 Installation of Camera The bracket (optional) can be installed to either the top of the camera as desired. When changing the position of the camera mounting bracket, you should always reuse the screws that have been removed. Notes: · If using a camera mounting bracket, select a location that is strong enough to bear the full weight of the camera and the mounting bracket for long periods, and install the camera and mounting bracket securely. [. . . ]