User manual LG LVW901

[. . . ] Network Dome Camera User Manual MODEL: LVW900 LVW901 Before connecting, operating or adjusting this product, please read this user manual carefully and completely. AB28 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] The users from these IP addresses need to be specified in the user list with the appropriate access rights. The IP list is to control the access permission of clients by checking the client IP address. Save: Click this button to confirm the settings. Add: Click this button to add the IP address. From: Enter the start IP address for the IP filtering. To: Enter the end IP address for the IP filtering. Note: If you want to deny or to allow a range of IP addresses, enter the start IP address to "From" and the end IP address to "To". You can also add an IP address by entering the IP address to "From" and "To". Operation and settings 33 3. Repeat the steps 1 to 3 to add additional IP address. · Remove: Click this button to delete the IP address. The IP address will be deleted. User settings Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. A maximum of 50 users can be created. User list > Add the User You can register a new user with various access rights. (Should have a minimum of 4 characters and preferably a combination of alphanumeric). To confirm the password, retype the password that you typed in the Password box. 34 Operation and settings 4. Select the authority drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Administrator: Allows you to operate setup menus and to view live images. Power user: Use of the limited functions of the system (The Configuration menu is not allowed. A power user can use the Live View, OSD control and audio functions. Normal user: Provides the lowest level of access, Allows to view live images only. Custom user: The user can login and view the live stream image only when the "Enable anonymous login" option is checked to enable it. Anonymous > Enable anonymous login Check the box to enable anonymous user login - allows the user access for only viewing the live stream image. Maximum RTP stream connection > Maximum number of simultaneous stream connection Set this number to limit the number of simultaneous stream connections. Note: Preview window of the IP device setting and preset setting are affected by this setting. · Save: Click this button to confirm the settings. - Note: Remember the password. [. . . ] Ensure that the mute button of the client computer is not set and all the audio settings are correct. Speaker button on the web viewer should be enabled to listen the audio from the network camera. Ensure that the bidirectional audio button is enabled on the Web viewer and the microphone is set. Change the input and the output gain for microphone and the speaker respectively to set correct audio level. [. . . ]