User manual LG LW-C0960HS

[. . . ] - Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. - This MP3 player is for use only with UL listed personal computers that have installation instructions detailing user installation of card cage accessory. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Warning - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Caution - The appliance is not intended for use by young children or infirm persons without supervision. - Young Children should be supervised to ensure that they do not play appliance. - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation ex- Disposal of your old appliance posure. Industry Canada requirement - This Class B digital apparatus complies with Canadian ICES-003. [. . . ] 2 Select [Manual]. 6 After finishing the installation, click [Finish]. 3 You can see the manual. Note You must install the Adobe Acrobat Reader to read the manual. - You can install CODEC if it is not installed on PC. 7 Click [Start] k [All Programs] k [LG Media Center] k [LG Media Center] to start the program. Note - During installation of the LG Media Center, you can install the Windows Media Player and the Internet Explorer for an operating environment. - The pop up image may be different depending on the OS of PC. 9 Connecting to the PC To connect the player to the PC 1 Press and push the slide USB switch to expose USB connector and insert the connector to the USB port of your PC. - Check whether the connector is correctly plugged in. To disconnect the player from the PC This feature is to safely remove MP3 player from the PC after uploading or downloading the files. 1 Double-click on the Remove Hardware the PC. icon on the task bar of 2 Click [Stop] when the window appears. 2 When the USB connector is connected, the following will be displayed on LCD. - The software version is displayed on screen. 3 Click [OK]. 3 In case of a correct connection, an icon will be displayed on the task bar of the PC. - The icon shapes on the task bar may differ depending on the OS of the PC. 4 After a message that the large-capacity USB storage can be safely removed is displayed, remove MP3 player from the PC. - If the USB connector is disconnected while the player is con- nected to the PC to store or delete a file, the data may get lost. 10 Connecting to the PC To charge the player MP3 player will be also automatically charged when connecting the player to the PC. - On the display of the player, the charging status will be displayed as follows: (Charging time : More than 4 hours) To download files 1 Press and push the slide USB switch to expose USB connector and insert the connector to the USB port of your PC. - Check whether the connector is correctly plugged in. 2 Check whether a new drive has been added in the Windows Explorer in the PC. 3 Drag the file you want to copy to the removable disk. - When the player is fully charged, the screen is displaed as shown below. Note · MP3 player may completely discharged first time you purchase the product. Charge the battery first. · Charging time may vary according to PC system requirements or · · · · operating environment. If your PC is suspended, MP3 player is not charged. Do not charge MP3 player for longer than 12 hours. - To operate this function, you must press OK in Preset mode. Recording screen a b 2 When a message "Delete this CH" appears, select "Yes" by using m/M and press OK briefly. c e - When a channel is deleted, we can still receive other preset channels. When no preset channel is left, the and then disappears. icon appears d 1 Elapsed Time 2 Remaining Time 3 Bit Rate 4 Recording file name 5 Recording Mark Setting Preset/Non-Preset Mode Setting Preset Mode 1 Press OK briefly while listening to the radio. 2 Preset mode is set and the icon appears. Recording FM radio broadcasting 1 Press B/X briefly to start recording while listening to the radio. Tip Preset mode: When the existing radio channels are already set, it is called 'Preset mode'. Setting Non-Preset Mode 1 Press OK briefly once again. 2 Non-Preset mode is set and the icon disappears. Note If the memory is not enough to record, "Memory full not record" will appear. In this case, delete the files and secure the memory space. Tip Non-Preset mode: When the existing radio channels are not already set, it is called 'Non-preset mode'. 2 Press B/[] to pause recording. Scanning the FM radio stations Auto Scan In Non-Preset mode, press m/M for longer than 2 seconds, and you can find available radio stations automatically. 3 By pressing B/[] again, the user can resume recording. 4 Press MENU briefly to end recording. Files will be stored in FM folder in a format 'F001. WAV'. Manual Scan 1 In Non-Preset mode, press m/M, and the frequency decreases/increases. 2 In present mode, press m/M button, and you can listen to the previous/next preset station. Note Listening to the recorded file 1 Press and hold MENU to select the music mode. 3 Press + / - to select [FM] and OK to confirm. 4 Choose a recorded file you want to hear by using + / - and press OK or B/[] briefly. · Reception may be weak in some areas. [. . . ] Always make sure to back up important data. We do not take any responsibilities for data loss. - The PC does not recognize the player properly. - Text appears broken and somewhat unreadable on the screen. [. . . ]