User manual LG LW-C1268CL

[. . . ] Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Heat Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The outer airflow blade moves up and down. The airflow direction indicator is displayed automatically. To stop the Energy saving function, press the Note You can select the Energy saving function only in Cool mode. 3 button to adjust the temperature until the required Press the temperature is displayed. You can set the temperature between 26°C and 30°C. Note If you want to adjust temperature under 26°C, cancel the Energy saving function before adjusting the temperature. 4 Press the to select the fan speed until the required setting is displayed. Auto Low Medium High Turbo Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on or off in cool/heat mode. 1 Press the Result: (On/Off) button. The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps. 2 Press the Result: button to select cool or heat mode. The indoor unit beeps each time you press the The air conditioner runs in cool or heat mode. button. 3 Press the Result: button. Make sure do not touch the inner blades during operation. It may cause injury on your fingers. E-20 Selecting the Auto Cleaning Function ENGLISH E-21 Auto cleaning function offers inside air conditioner dry to prevent mold growth. This feature allows you to use the air conditioner more clean and fresh air. Remote Control 1 Press the button. When the air conditioner is turned off, The indicator on the indoor unit display appears and the Auto cleaning function runs. When the air conditioner is turned on, The indicator on the indoor unit display appears and the Auto cleaning function runs after stopping the air conditioner operation. Mode Auto(cool), Cool, Dry Auto(heat), Heat, Fan Operating time 30 minutes 15 minutes Control Panel Caution Auto cleaning operating time varies according to the mode you selected before the air conditioner turned off. Note The Auto Cleaning indicator appears only on the indoor unit display. When the air conditioner is turned on, the Auto cleaning function runs after stopping the air conditioner operation. Setting the On Timer You can set the On Timer to turn on the air conditioner automatically at the appointed time within a range of 30 minutes to 24 hours. 1 Press the button . 2 Press the or buttons until the desired time is displayed to set the On Timer. You can set the time between 0. 5 hour and 24 hours. 3 Press the Result: button to complete the setting. The selected mode and the temperature on the display disappear after 10 seconds. The air conditioner turns on automatically at the appointed time and the On Timer setting disappears. 4 Press the button until the desired mode is displayed at the top of the remote control to select the mode in advance. Result: Note The air conditioner operates in the selected mode when it is turned on. [. . . ] They may save you the time and expense of an unnecessary call. Problem The air conditioner does not operate at all. Explanation/Solution Check if power is on and operate the air conditioner again. Check if the circuit breaker is switched off. [. . . ]