User manual LG LW1400ER

[. . . ] Do not use thinner, alcohol, benzene, insecticide or other volatile substances on the surface. The surface of the product or the operation of the device may negatively be affected. · When cleaning the surface of the device, always use dry clothes. Do not use water, chemicals, or cleansing detergents as electric shocks or damages on the devices may occur. [. . . ] > Audio Type: Choose the type of audio encoding that you wish to use. (G. 711 PCMA, G. 711 PCMU, G. 726 24K, G. 726 32K) Audio Out > Enable: Activate this checkbox to activate the Audio output mode. Audio · Save: Click this button to save the changes you made. Note: When sending sound signals from the microphone on your computer, the sound from the speaker may be small depending on the performance of the microphones. Audio In > Enable: Activate this check box to use the Audio Input. Note: Even if this setting is altered, the users who are already connected are not affected by the changed value. 37 Initial Configuration and Operation Motion detect General > Sensitivity: Set the sensitivity of the motion detector to detect any moving objects in the scene. High higher sensitivity, even tiny twitches in the scene can be detected as a moving object. Save: Click this button to save the changes you made. > Setting the motion detector frame 1. Click [Add] button to any a motion detector frame on screen. As you click the button, newly added motion detector frame will appear on the preview screen, and you may add upto five frames per scene. Set the sensitivity value for the frame at Sensitivity menu. Click on the motion detector frame at its rim or sides and drag to a desired position. Preview Set the location of the motion detector frame or the view the current location thereof. 38 Initial Configuration and Operation Notes: · The size of the motion detector frame can be adjusted. > IP Address status > Automatically set with DHCP: Click on this radio button if you wish to use DHCP mode. The network settings are automatically configured by the DHCP server. Notify to SMTP server, if IP address is changed: With this option activated, the system will notify the user with the new IP address each time it changes by sending an e-mail. > IP address: Input the IP address here. Subnet Mask: Input the subnet mask address here. Gateway: Input the gateway addresshere. DNS Server status Primary DNS Server: Input the main DNS server address here. A DNS (Domain Name Service) changes the domain name into an IP address within the network. Secondary DNS Server: Input the address of the Secondary DNS Server. · Save: Click this button to save the changes you made. 42 Initial Configuration and Operation DDNS DDNS allows the user to use a URL to connect to an LG IP device instead of using an IP address. IP filtering You may add up to 10 IP addresses here, either one at a time, or a bunch of them simultaneously. DDNS Status > > Don't use DDNS server: Click when you are not using DDNS. Use DDNS server: Click here to use DDNS. Provider: The provider of DDNS Hostname: Input the host name you want to use. · Save: Click this button to save changes you made. 43 Initial Configuration and Operation IP list > Basic Policy: Choose the basic policy for granting access. Allow all: Basically the access will be granted to all IP addresses, except for those in the IP block list by the user. [. . . ] Select the optimized settings in consideration of the performance of your network. 60 Things to Check before Reporting a Malfunction · The video may be interrupted or play slow when there is a heavy traffic load on the network. Remove the device that cause such a heavy traffic or make changes to settings to prevent such a surge of the traffic. · The video may be interrupted or play slow when there are a number of other applications running in the client computer. When using LG IPSOLUTE or Smart Web Viewer, try not to use any other software in your computer. [. . . ]