User manual LG LW332-F

[. . . ] OWNER'S MANUAL High Definition Network Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LW332-F LW335-F LW332 Series LW335 Series P/NO : MFL67164907 1106 (V1. 0) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Administrator: Allows you to operate setup menus and to view live images. 3. 4. 44 Operation and settings Power user: Use of the limited functions of the system (The Configuration menu is not allowed. A power user can use the Live View, OSD control and audio functions. Normal user: Provides the lowest level of access. Custom user: The user can login and view the live stream image only when the "Enable anonymous login" option is checked to enable it. > Edit the registered user You can change the password or authority. Choose the user ID and then click the [Edit] button. Change the Password or Authority, then click the [Save] button to confirm your selection. Note: The default administrator user ID `admin' and `anonymous' are permanent and cannot be deleted. 1. - > - Note: Remember the password. Anonymous > Enable anonymous login Check the box to enable anonymous user login - allows the user access for only viewing the live stream image. 45 Operation and settings Max RTP stream connection > Maximum number of simultaneous stream connection: Set this number to limit the number of simultaneous stream connections. The connections depend on the stream configuration as shown in the following Maximum RTP stream connection by stream configuration. Video Codec H. 264 MJPEG Resolution 720p 720p Frame Rate 30 20 Quality HIGHEST HIGHEST Maximum RTP stream Up to 10 Up to 7 Note: Preview window of the IP device setting and preset setting are affected by this setting. · Save: Click this button to confirm the settings. 46 Operation and settings SD Card settings Basic SD Card Recording > Always: Start the recording at once. > Recurrence Pattern: The recording is started according to the setting time of the selected day. Note: You can not set the time for a day. It will start the recording for the selected day of the time. > > Never: [Always] and [Recurrence Pattern] recording functions are not activated. Overwrite: If the micro SD card has insufficient space and this option will be activated. DiskFull Notification: Sends an warning e-mail to the SMTP server when the micro SD card has fully recorded. Select the SMTP server from the drop-down list. You should register the SMTP server on the Event server setting to set this function. > 47 Operation and settings > Network Failure Recording: Select the checkbox to activate the micro SD card recording function. If the system does not work with recording server, the system will record the data to the micro SD Card. When the system connect to the recording server again, the recorded data of the micro SD card will transfer to the recording server automatically. [. . . ] · · · · · The sound card needs to be checked for its support for full duplex communication. Ensure that the mute button of the client computer is not set and all the audio settings are correct. Speaker button on the web viewer should be enabled to listen the audio from the network camera. Ensure that the bidirectional audio button is enabled on the Web viewer and the microphone is set. [. . . ]