User manual LG LW6354

[. . . ] OWNER'S MANUAL High Definition Network Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LW6324 series LW6354 series P/NO : MFL67182707 1106 (V1. 0) Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] Select the authority from the drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Administrator: Allows you to operate setup menus and to view live images. Power user: Use of the limited functions of the system. (The Configuration menu is not allowed. ) A power user can use the Live View, OSD control and audio functions. Normal user: Provides the lowest level of access, Allows to view live images only. Custom user: The user can login and view the live stream image only when the "Enable anonymous login" option is checked to enable it. > Edit the registered user You can change the password or authority. Choose the user ID and then click the [Edit] button. Change the Password or Authority, then click the [Save] button to confirm your selection. Note: The default administrator user ID `admin' and `anonymous' are permanent and cannot be deleted. - User list > Add the User You can register a new user with various access rights. (Should have a minimum of 4 characters and preferably a combination of alphanumeric. ) 3. To confirm the password, retype the password that you typed in the Password box. Operation and settings 37 Anonymous > Enable anonymous login Check the box to enable anonymous user login - allows the user access for only viewing the live stream image. Maximum RTP stream connection > Maximum number of simultaneous stream connection: Set this number to limit the number of simultaneous stream connections. The connections depend on the stream configuration as shown in the following Maximum RTP stream connection by stream configuration. Video Codec Resolution H. 264 MJPEG Note: Preview window of the IP device setting and preset setting are affected by this setting. · Save: Click this button to confirm the settings. 720p 720p Frame Rate 30 20 Quality HIGHEST HIGHEST Maximum RTP stream Up to 10 Up to 7 SD Card settings Basic SD Card Recording > Always: Start the recording at once. > Recurrence Pattern: The recording is started according to the setting time of the selected day. Note: You can not set the time for a day. It will start the recording for the selected day of the time. > Never: [Always] and [Recurrence Pattern] recording functions are not activated. 38 Operation and settings > Overwrite: If the micro SD card has insufficient space and this option will be activated. > DiskFull Notification: Sends an warning e-mail to the SMTP server when the micro SD card has fully recorded. [. . . ] Provide higher values for quality and support the surrounding environment with enough light. Audio condition The client computer that is interacting with the camera needs to have a sound card that is functional to support speaker and microphone. The sound card needs to be checked for its support for full duplex communication. Ensure that the mute button of the client computer is not set and all the audio settings are correct. Speaker button on the web viewer should be enabled to listen the audio from the network camera. [. . . ]