User manual LG LWN2432BCP1

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. · A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Repeat the steps 1 to 3 to add additional IP address. Remove: Click this button to delete the IP address. The IP address will be deleted. · · 43 Operation and settings User settings Basic The IP device is shipped with the login rights of administrator only. If others need to access the IP device excluding the configuration a login with viewer rights need to be created. User list > Add the User You can register a new user with various access rights. (Should have a minimum of 4 characters and preferably a combination of alphanumeric). To confirm the password, retype the password that you typed in the Password box. Select the authority from the drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Administrator: Allows you to operate setup menus and to view live images. 3. 4. 44 Operation and settings Power user: Use of the limited functions of the system (The Configuration menu is not allowed. A power user can use the Live View, OSD control and audio functions. Normal user: Provides the lowest level of access. Notes: The recorded file name is made automatically as the "[Created date of the file]_[GMT Recording Time]+(-)[Value of the Local Time minus GMT Time (Second)]_[Use or not of the Daylight saving time(N/D)] [Stream index][DeleteFlag]. DAT" type. Disk Management > Using the micro SD card 1. Insert the micro SD card carefully to the micro SD card slot of the camera. If the micro SD card is mounted to the system correctly, the [Mount] button will be changed to the [Unmount] button. Displays the information of the [Disk ID], [Status], [Total Space] and [Free Space] options. Notes: · When the micro SD card is mounted, you should format the micro SD card. After the micro SD card format is finished, you should click the [Mount] button to use it. · When you use the micro SD card format function, it may not progress immediately. In this case, you should try it again after waiting a few minutes. > > > 48 Operation and settings > Remove the micro SD card 1. If the micro SD card is unmounted from the system correctly, the [Unmount] button will be changed to the [Mount] button. Remove the micro SD card from the micro SD card slot of the camera. [. . . ] If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version. Video images may be noisy if you are using the camera in a very low light environment or the bit rate/ quality is set to very low values. Provide higher values for quality and support the surrounding environment with enough light. Audio condition · The client computer that is interacting with the camera needs to have a sound card that is functional to support speaker and microphone. [. . . ]