User manual LG M1200

[. . . ] If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Do not put heavy objects on the product or sit upon it. - If the product collapses or is dropped, you may be injured. [. . . ] When the page has been found, the information line appears briefly on your screen. Press the button again to reappear teletext. 14 Name and Function of the Parts Rear View RGB (PC/DTV) IN ANTENNA IN AV1 AUDIO (RGB) IN VIDEO L AUDIO R (Mono) S-VIDEO H/P AV IN 2 RGB (PC/DTV) IN ANTENNA IN AV1 AUDIO (RGB) IN VIDEO L AUDIO R (Mono) S-VIDEO H/P AV IN 2 Power Connector : Connect the power cord. SCART Input/Output Terminal AV Input Terminal D-Sub Analog Signal Connector RGB Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack. Headphone/Earphone Connection Terminal 15 Name and Function of the Parts AV Input Terminal (RGB) IN VIDEO L AUDIO R (Mono) S-VIDEO AV IN 2 Video Input Terminal Audio Input Terminal S-Video Input Terminal 16 Connecting to External Devices Connecting to your PC 1. First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. RGB (PC/DTV) IN ANTENNA IN AV1 AUDIO (RGB) IN VIDEO L AUDIO R (Mono) S-VIDEO H/P AV IN 2 Connecting with the D-Sub signal input cable. RGB (PC/DTV) IN Rear side of the product. Macintosh Adapter (Not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) 2. Connect the audio cable. AUDIO (RGB) IN Audio cable Rear side of the product. · Make sure to check the sound card connection terminal in the PC before connecting to the product. If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user's guide. ) - Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier. - *Line Out : The terminal connected to the speaker equipped with an amplifier. If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated with an amplifier. 17 Connecting to External Devices 3. Connect the power cord. Rear side of the product. RGB (PC/DTV) IN ANTENNA IN AV1 AUDIO (RGB) IN VIDEO L AUDIO R (Mono) S-VIDEO H/P AV IN 2 4. 1 Turn on power by pressing the power button on the product. INPUT MENU OK VOL PR Power button 2 Turn on the PC. 5. Select an input signal. The menus can be shown on the screen in the selected language. Or, Press the button and then button to select Country. Press the button and then button to select your desired language or country. 4. Press the MENU button repeatedly to return to normal TV viewing. Note · If you don't finish set up Installation Guide by pressing MENU button or time out of OSD (On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on. · If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. · Hebrew is added to Country of Installation Guide according to the countries which using Hebrew languages. 28 Adjusting the Screen STATION ID set/Select the channel when using the TV Auto programme Station Auto programme Manual programme Programme edit Favourite programme To set OK MENU System It should be set before run auto searching. Press the buttons to select the TV system of the country or part of the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U. K/Ireland) DK : PAL D/K, SECAM D/K (East Europe) L: SECAM L/L' (France) Storage from To select a programme number or enter the programe number with the number buttons from where you want to start searching for new channels. you want to keep the channels 1 to 10 stored earlier, enter programe number 11. Your TV search for new channels from number 11 onwards. * Numbers available to store : 0~99 Press OK or button to start automatic programming. [. . . ] · Adjust the Position menu in OSD . · See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel ­ Display ­ Setting menu. · Adjust the Phase menu in OSD. G Do thin lines appear on the background screen? [. . . ]