User manual LG M1910A-BM

[. . . ] Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. [. . . ] Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. A2 Unfolding the stand base Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Unfolding the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Hold down the release button inside the stand and strongly pull out the stand with your two hands. The stand won't move if you don't press release button. 3. Connect the signal input cable and the power cord. Arrange the signal input cable and the power cord by holder, as shown. 5. When successfully arranged, fit the back cap in along the groove. A3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Using the Computer 1. When the icon you want becomes highlighted, press the AUTO/ SELECT Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the MENU Button. Exit the OSD by pressing the MENU Button. A8 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu PICTURE Sub-menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET RED GREEN BLUE POSITION TRACKING AUDIO HORIZONTAL VERTICAL CLOCK PHASE VOLUME TREBLE BASS BALANCE SETUP LANGUAGE OSD HORIZONTAL Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen 6500K 9300K To adjust the position of the screen To improve the clarity and stability of the screen To adjust the audio function. POSITION VERTICAL To customize the screen status for a user's operating environment WHITE BALANCE POWER INDICATOR FACTORY RESET : Adjustable NOTE The order of icons may differ depending on the model (A9~A12). A9 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Sub-menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A10 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu BRIGHTNESS CONTRAST GAMMA Description To adjust the brightness of the screen. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. PICTURE COLOR PRESET Select the screen color. Set your own blue color levels. RED GREEN BLUE POSITION HORIZONTAL VERTICAL To move image left and right. To move image up and down. TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. PHASE A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu VOLUME TREBLE BASS Description To decrease or increase volume level. To raises or lowers Bass level. AUDIO BALANCE To adjust the balance level. SETUP LANGUAGE OSD POSITION WHITE BALANCE To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. [. . . ] Press the AUTO/SELECT button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. [. . . ]