User manual LG M1917A-BZ

[. . . ] The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. [. . . ] Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1 system, and other attached devices is turned off. A Connect D-sub(Analog signal) Cable B Connect DVI-D(Digital signal) Cable 2 in order, then tighten the screw NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type DVI-D (This feature is not available in all countries. ) 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) Power Button NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 8 Connecting the Display Connecting with the PC W1943SB/W2043SE/W2243S 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1 system, and other attached devices is turned off. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Press the MENU Button once to return to the main menu to select another function. Press the MENU Button twice to exit from the OSD. 12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. You can save or restore the adjusted value even when using a different condition. · ACE (Adaptive Clarity Enhancer): Selects the clarity mode. Not applied Weak clarity and luminosity contrast. Strong clarity and luminosity contrast. To adjust the USER sub-menu function, press the AUTO/SET Button · RCM (Real Color Management): Selects the color mode. Not applied MENU : Exit : Decrease : Increase SET : Select another sub-menu Green enhance Salmon color tone Color Enhance NORMAL DEMO This is under normal operating conditions. * Normal mode is when f-ENGINE is turned off. This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. 15 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. [. . . ] SOG (Sync On Green), Digital M1917A-BZ Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz Resolution Plug&Play Power Consumption Dimensions & Weight Max Recommend DDC 2B On Mode Sleep Mode Off Mode : 21W(Typ. ) 1W 1W Without Stand Width 44. 90 cm / 17. 68 inches Height 29. 05 cm / 11. 44 inches Depth 5. 85 cm / 2. 30 inches 3. 3 kg (7. 28 lbs) With Stand Width 44. 90 cm / 17. 68 inches Height 36. 10 cm / 14. 21 inches Depth 18. 30 cm / 7. 20 inches Weight(excl. packing) Range Power Input Environment al Conditions Tilt : -5°~15° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. 23 Specifications Display 18. 51 inches (47. 01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47. 01 cm 0. 30 x 0. 30 mm (Pixel pitch) Horizontal Freq. Input Form 30 - 61 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz W1943SB Sync Input Video Input Signal Input Input Form Max Recommend DDC 2B On Mode Sleep Mode Off Mode Resolution Plug&Play Power Consumption Dimensions & Weight : 21W(Typ. ) 1W 1W Without Stand Width 44. 90 cm / 17. 68 inches Height 29. 05 cm / 11. 44 inches Depth 5. 85 cm / 2. 30 inches 3. 3 kg (7. 28 lbs) With Stand Width 44. 90 cm / 17. 68 inches Height 36. 10 cm / 14. 21 inches Depth 18. 30 cm / 7. 20 inches Weight(excl. [. . . ]