User manual LG M2232D

[. . . ] The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card D-SUB Cable or Power Cord AC-DC Adapter AC-DC Adapter ( Depending on the country ) ( Depending on the country ) Stand Body Stand Base CAUTION Do yy not use any unapproved accessories to ensure the safety and product life span. Any yy damages or injuries by using unapproved accessories are not covered by the warranty. NOTE The yy accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator Lighting On: Turned on yy Lighting Off: Turned off yy (Power Button) Button (See p. 11) Connection panel (See p. 9) ASSEMBLING AND PREPARING 5 Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. Detaching the Stand Base ENG ENGLISH 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 2 CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 1 Pull out the Stand Body and Stand Base from the monitor set. 2 Turn the screw to the left with a coin. [. . . ] (Power Button) Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. 1920 x 1080 12 CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. buttons. 2 Set the options by pressing the ◄ or ► or ▼ 3 Select the "Next Menu" button to enter the more option settings. 4 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Menu Brightness Contrast Wide/Original Description To adjust the brightness, contrast of the screen Wide Switch to full screen mode according to input image signal. Original Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). Reset Restore all factory default settings. Press the◄ , ► buttons to reset immediately. Menu > Next Menu Picture Color Display Sharpness Gamma Color Temp Horizontal Vertical Clock Phase Others Language Power Indicator Description To adjust the clearness of the screen . To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment CUSTOMIZING SETTINGS 13 Picture ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the Menu OSD. option settings. 2 Select the "Next Menu" button to enter the more 3 Enter to Picture by pressing the ▼ button. So, those values should be different from each panel and panel yy vendor. LG yy calculated these values by using “broadcast video signal” (including broadcast video: IEC 62087) SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING yy function. 20 CUSTOMIZING SETTINGS * Before using below functions, please install DUAL SMART SOLUTION programme. DUAL DISPLAY 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. ENGLISH ENG 2 Select DUAL DISPLAY by pressing the ► button. 3 Enter to DUAL DISPLAY by pressing the ▼ button. 4 Set the options by pressing the ◄ or ► buttons. 5 Select Exit to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. DUAL DISPLAY Clone Extended Off Description By selecting Clone, user can use secondary monitor as done mode of primary monitor. By selecting Extended, user can use secondary monitor as extended mode of primary monitor. If select Off, DUAL DISPLAY is off. * Before using below functions, please install DUAL SMART SOLUTION programme. DUAL WEB 1 Press FUNC. button on the bottom of the Monitor set to display the FUNC. OSD. 2 Select DUAL WEB by pressing the ► button. [. . . ] yy When the monitor is on "No-Signal" in 5 minutes, the monitor goes to DPM mode. Do you see an "OUT OF RANGE" message on the screen? Do you see a "NO SIGNAL" message on the screen? Do you see a "OSD LOCKED" message on the screen?Do you see “OSD LOCKED” when you push MENU button? yy You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. [. . . ]