User manual LG M3201C

[. . . ] If the lid is open during the wash, rinse or spin cycles, the operation stops for safety. Temperature and the quality of water to make the best washing algorithm for washing and rinsing, which can give the best washing effect. The purpose of this cycle is to optimize detergent residues during the washing and Rising cycles, in order to implement this effect, the washer adds more rinsing times by I-sensor. A built-in load sensor automatically detects the laundry load and a Advanced technology is built into the Electronic Control System which When "Punch + 3" washing wings turn, the washing This makes the both sides current of water which improve washperformance by rubbing clothes strongly. [. . . ] Use prewash stain remover, denatured alcohol or nonflammable dry cleaning fluid. Wash with chlorine bleach if safe for fabric. or , soak in oxygen bleach and HOT water before washing. Badly mildewed fabrics may be permanently damaged. apply nail polish remover to back of stain. Repeat, replacing paper towels frequently. Once paint is dry, it cannot be removed, OIL BASED AND VARNISH : Use solvent recommended on can label. For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration. Pretreat with prewash stain remover or nonflammable dry cleaning fluid. â· This button allows you to select 8 different programs for different kinds of laundry and dirtiness. * Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use TUB CLEAN course to clean the tub. (refer to page 21) * Even if the water level is changed by the user in FUZZY(Normal) Program, the sensor will still work. The sensor algorithm may differ according to models. * The control panel may differ according to different models. The built-in sensor detects the size of the load and the ideal wash power and wash, rinse and spin times are set accordingly. (wash only "water washable" clothes) Before washing your woolens check the care label for the washing instructions. When washing woolens use a mild Detergent recommend- ed for washing wool. Use this mode when washing lightly soiled clothes for a short time. Use Jean program when washing Jeans of different sizes Spread the jean evenly in the tub If someone has sensitive skin or skin trouble, use this program. Water will be supplied for 2 minutes after the start of the wash to supplement the water the laundry has absorbed. [. . . ] If you operate door like the below picture that, you can hurt so use after check locker was fixing or not. Many washing problems involve poor soil & stain removal, residues of lint and scum, and fabric damage. Use correct amount of Detergent for load size, amount of soil and water Hardness. â· Different Water Temperature may be required according to soil type. [. . . ]