User manual LG M3700C-BA

[. . . ] The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 1 Safety Precautions 2 Safety Precautions 3 Safety Precautions Please read these safety precautions carefully before using the product. Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reach of children. [. . . ] 1) Press the MENU button and then use 2) Press the button and then use button to select the Clock menu. 3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). Off / On time The off time automatically switches the set to standby at the pre-set time. 1) Press the MENU button and then use 2) Press the button and then use 3) Press the button and then use 4) Press the button and then use 5) Press the button and then use button to select the TIME menu. button to select On or Off. Auto sleep If Auto sleep is active and there is no input signal, the set switches to Stanby mode automatically after 10 minutes. 1) Press the MENU button and then use 2) Press the button and then use button to select On or Off. Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. The set must be in standby mode for the On time to work. When On time is operated, input screen is turnd on as it was turned off. 25 Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Language Child lock To choose the language in which the control names are displayed. The Set can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. If you set On at any time, the power indicator will automatically be turned on. Use this function to set the Logo Display Lamp on the front side of the product to On or Off. If you set On, the lamp will automatically be turned on. Use it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ HDMI/DVI PC mode. ) Logo Light Demo 29 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto config. (RGB PC input only) Manualconfig. This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analogue signal input only. If the picture isn't clear after auto adjustment and especially that characters are still trembling, adjust the picture phase manually. * It's not available to use Phase, Clock function in RGB DTV, Component, HDMI/DVI DTV. ) To minimize any vertical bars or stripes visible on the screen Clock background. The horizontal screen size will also change. This function is suitable for analogue signal input only Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. [. . . ] ISM mode(Command: j p) Used to select the afterimage preventing function. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 1 : Inversion 2 : Orbiter 4 : White Wash 8 : Normal Acknowledgement [p][ ][Set ID][ ][OK][Data][x] L A11 RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] L 19. [. . . ]