User manual LG M3701C-BHE

[. . . ] User's Guide M3201C M3701C Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service. Safety Precautions Maintenance and Servicing Never remove the back cover of the TV : this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call authorized service center or PDI. Cleaning and Disinfection Clean the exterior of this TV by removing dust with a lint-free cloth. Caution : To avoid damage to the surface of the TV, do not use abrasive or chemical cleaning agents. Clean only with dry cloth. Note to cable/TV Installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code. (U. S. A). [. . . ] This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position. In order to unlock it, do the following : · Push the MENU button on the remote control and set Child lock to the 'Off' position. ISM Method A frozen of still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the sets screen for a long period of time. Normal : If image sticking is never a problem, ISM is not necessary -set to Normal. White wash : white wash removes permanent images from the screen. (An excessive permanent image may be impossible to clear entirely with white wash. Orbiter : may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion : This is function to invert the panel color of the screen. The panel color is automatically inverted every 30 minutes. Set ID Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo 1 You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. 26 Selecting and Adjusting the Screen Selecting the options · To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RS-232C or RGB Out Tile mode Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 It is used to enlarge the screen and also used with several products to view screen. To set · Tile Mode Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4) - 4 x 4 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. - Tile mode (product 1 ~ 4) : r(2) x c(2) row ID 1 ID 2 column ID 3 ID 4 27 Selecting and Adjusting the Screen Selecting the options - Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 column ID 7 ID 8 ID 9 - Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 2 column - Tile mode (product 1 ~16) : r(4) x c(4) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 column ID 9 ID10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 28 Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 To set · Tile ID · H Size · V Size · H-Position · V-Position · Reset Select the location of the Tile by setting an ID. Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. Moving the screen position horizontally. Function to initialize and release Tile. [. . . ] Key(Command : m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code : Refer to page A18. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] L A12 RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 20. Tile Mode(Command : d d) Change a Tile Mode. [. . . ]