User manual LG M3702C-BHG

[. . . ] User's Guide M3702C Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Safety Precautions Maintenance and Servicing Never remove the back cover of the TV : this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call authorized service center or PDI. Cleaning and Disinfection Clean the exterior of this TV by removing dust with a lint-free cloth. Caution : To avoid damage to the surface of the TV, do not use abrasive or chemical cleaning agents. Clean only with dry cloth. Note to cable/TV Installer This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code. (U. S. A). [. . . ] If Auto Sleep is active and there is no input signal, the set switches to off mode automatically after 10 minutes. 1) Press the MENU button and then use 2) Press the button and then use button to select On or Off. When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. Auto Sleep Power On Delay Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. When On time is operated, input screen is turned on as it was turned off. 29 User Menus Selecting the options Option Language Key Lock ISM Method Power Indicator Logo Light DPM Select Tile Mode Factory Reset MENU To set Language Key Lock To choose the language in which the control names are displayed. The monitor can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position. In order to unlock it, do the following : · Push the MENU button on the remote control and set Key Lock to the 'Off' position. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Normal : Leave on normal if you don't foresee image burn in being a problem. White wash : White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. Orbiter : May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion : This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. Dot Wash : This function moves the black dots of the screen. The black dots is automatically moved every 5 second. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. Logo Light DPM Select Use this function to set the Logo Light on the front side of the product to On or Off. [. . . ] Off Timer (On/Off Timer) On, Off (Command : f c) Set days for Off Timer. Transmission [f][c][][Set ID][][Data1][][Data2][Cr] [Data1] 0 (Write), FFH(Read) [Data2] 00H~FFH bit0 : Monday Off Timer On(1), Off(0) bit1 : Tuesday Off Timer On(1), Off(0) bit2 : Wednesday Off Timer On(1), Off(0) bit3 : Thursday Off Timer On(1), Off(0) bit4 : Friday Off Timer On(1), Off(0) bit5 : Saturday Off Timer On(1), Off(0) bit6 :Sunday Off Timer On(1), Off(0) bit7 : Everyday Off Timer On(1), Off(0) Acknowledgement [c][][Set ID][][OK/NG][Data1][Data2][x] A19 L L RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 33. On Timer (On/Off Timer) Time (Command : f d) Set On Timer. Transmission [f][d][][Set ID][][Data1][][Data2][Data3][Cr] [Data1] 0 : Monday 1: Tuesday 2 : Wednesday 3 : Thursday 4 : Friday 5 : Saturday 6 : Sunday 7 : Everyday [Data2] 00H~17H (Hours) [Data3] 00H~3BH (Minutes) Acknowledgement [d][][Set ID][][OK/NG][Data1][Data2][Data3][x] *When reading data, FFH is inputted for [Data2], [Data3]. [. . . ]