User manual LG MA-1905B

[. . . ] The illustrations in this manual may differ from the actual product and accessories. CD(Owner's Manual) / Card TriDef 3D software Program CD / Quick Installation Guide Power Cord Stand Body D-SUB Cable (This signal cable may be attached to this product before shipping out. ) DVI-D Cable (This cable is not included in all countries. ) Stand Base 3D Glasses (Normal type) 3D Glasses (Clip-on type) CAUTION y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (RGB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y Lighting On: Turned on y Lighting Off: Turned off (Power Button) Button (See p. 12) AC-IN/ D-SUB DVI-D HDMI Connection panel (See p. 10) ASSEMBLING AND PREPARING 5 Button MENU Accesses the main menus. (See p. 13) OSD LOCKED/ UNLOCKED Description ENG ENGLISH This function allows you to lock the current control settings, so that they cannot be inadvertently changed. [. . . ] 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p. 13) Sets the screen options. AUTO (See p. 5) Optimizes the resolution. EXIT Exits the OSD menu. MONITOR SETUP MENU 3D AUTO VOLUME INPUT EXIT 3D (See p. 14) Sets the 3D mode. VOLUME (See p. 14) Sets the volume. INPUT Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. y D-SUB / DVI Mode: MENU, 3D, AUTO, INPUT, EXIT y HDMI Mode: MENU, 3D, VOLUME, INPUT, EXIT CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings MENU 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. menu. 2 Press the MENU button to display the options in the OSD 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. BRIGHTNESS ORIGINAL RATIO 3D COLOR EFFECT COLOR TEMP PRESET RED GREEN BLUE CONTRAST BLACK LEVEL LANGUAGE SUPER ENEYGY SAVING FACTORY RESET 100 WIDE OFF PRESET WARM 50 50 50 70 HIGH ENGLISH NO EXIT The available program settings are described below. Menu BRIGHTNESS ORIGINAL RATIO Analog Digital HDMI WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). The picture quality is optimized at the 3D mode. y WARM: Set the screen to warm color temperature (more red). y MEDIUM: Set the screen to medium color temperature. y COOL: Set the screen to cool color temperature (More blue). USER y RED: Set your own red color levels. y GREEN: Set your own green color levels. Check the signal cable and try again. Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? Do you see a "OSD LOCKED" message on the screen?Do you see "OSD LOCKED" when you push MENU button? y You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message "OSD UNLOCKED" will appear. Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Press the AUTO button to automatically adjust your display image to the ideal setting. y Check Control Panel Display Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). TROUBLESHOOTING 17 CAUTION ENG ENGLISH y Check Control Panel Display Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. y If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. [. . . ] Digital Video Input Signal Input 15 pin D-SUB Connector /DVI-D Connector (Digital) HDMI Connector Input Form RGB Analog (0. 7 Vp-p/ 75 ohm), Digital Resolution Max D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI / HDMI (Digital) : 1920 x 1080 @ 60 Hz Recommend VESA 1920 x 1080 @ 60 Hz Plug & Play DDC 2B(Analog, Digital, HDMI) Power Consumption On Mode : 39 W(Typ. ) Sleep Mode 0. 5 W Off Mode 0. 5 W Power Input AC 100-240 V~ 50 / 60 Hz 1. 2 A Dimensions With Stand 59. 4 cm x 43. 3 cm x 17. 9 cm (Width x Height x Depth) Without Stand 59. 4 cm x 37. 1 cm x 6. 1 cm Weight Tilt Range Environmental conditions 4. 4 kg -5° to 15° Operating 10°C to 35 °C Temperature 20 % to 80 % Operating Humidity Storage Temperature -10°C to 60 °C Storage Humidity 5 % to 90 % non-Condensing Attached ( ), Detached (O) Wall-outlet type Stand Base Power cord Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 21 Preset Modes (Resolution) ENG ENGLISH Display Modes (Resolution) 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1680 x 1050 1920 x 1080 Horizontal Frequency(kHz) 31. 468 31. 469 37. 500 37. 879 46. 875 48. 363 60. 123 67. 500 63. 981 65. 290 67. 500 Vertical Frequency(Hz) 70 60 75 60 75 60 75 75 60 60 60 Polarity(H/V) -/+ -/-/+/+ +/+ -/+/+ +/+ +/+ -/+ +/+ Recommend Mode HDMI 3D TIMING 3D Format Frame Packing Frame Packing Side-by-Side(Half) Side-by-Side(Half) Side-by-Side(Half) Top-and-Bottom Top-and-Bottom Top-and-Bottom Resolution 1080 p 720 p 1080 p 1080 i 720 p 1080 p 1080 p 720 p Refresh Rate 24 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 24 Hz 50/60 Hz Limitation Indicator Mode On Mode Sleep Mode Off Mode LED Color Blue Blinking Blue Off 22 PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES PRECAUTIONS TO TAKE WHEN VIEWING 3D IMAGES 1 If you view images in the 3D mode for a long period of time (playing games, watching movies etc. ), you may feel dizzy. We strongly recommend you to take a rest after one hour of viewing 3D. (The time of experiencing dizziness varies depending on the individual. ) product. Otherwise, 3D images may appear to be overlapped or may not be displayed properly. [. . . ]