User manual LG MA09AHB NP1

[. . . ] , , . Safety instructions have two kinds of information, and each meaning of it is as blow. WARNING NOTES The violation of this instruction may cause serious injuries and even death. The violation of this instruction may cause light injuries or damage of the product. Take care of danger that may happen under specific condition. . . - . WARNING - . Do not install this product on the place where it cannot be supported. - It may cause the product to fall and could cause injuries. Do not hang on or impact on this product. - It may cause the product to fall and could cause injuries. . NOTES 4 - . . - . Install this product followed by the instruction of the manual. - Otherwise it may cause serious injuries or damage of the product. Do not install this product by yourself. Get some help from others. - It may cause the product to fall and could cause injuries. , , . - , . . [. . . ] . - . / First Step WARNING Before installing, check whether the material of wall satisfies the specifications and make sure to use enclosed anchors supplied with the product. - Otherwise it may cause safety problem. When drilling use drill and drill bit specified by the manufacturer. And the depth of the hole should satisfy the specifications. - Otherwise it may cause safety problem. . - , , . , , . Do not install this product near a sprinkler, a sensor, a high voltage electric line, any power source or the place where impact or vibration can affect. / Installation Do not place a heat source (radiator or heater) or a humidifier under the installed product. - It may cause a fire or could give an electric shock. . - , . , . - . Make sure to unplug before installing this product. - Otherwise it may cause a fire or could give an electric shock. Do not install this product barehanded. - It may cause injuries. / Others 5 Installing Wall mounting bracket 1. Detach the bolt from Wall mounting bracket. Detach the Product fixing bracket from Wall mounting bracket. Product fixing bracket Wall mounting bracket Bracket fixing screw 6 2. Assemble a product with the product fixing bracket . Attach the Product fixing bracket to the product using the fixing screws provided. Before installing, turn off the power and disconnect from all cables connected. / First Step 2 / Installation 1 / Others 1 2 . Assemble the product with the wall mounting bracket . Assemble a product with the wall mounting bracket installed on the wall as shown Fig. Do not install this product by yourself. It may cause the product to fall and could cause injuries. 1 1 . Tilt product fixing bracket assembled with product as above Fig, and insert screw to the hole. (Refer to Fig in circle as shown) , Wall , Hang product on a hook() by lifting up product and put down TV after mounting on the wall. 2 , (M4×12) 1 . Fix after assembling the product as shown Fig. and then insert one fixing screw (M4x12) to each of holes. [. . . ] Fix after assembling the product as shown Fig. and then insert one fixing screw (M4x12) to each of holes. Entirely fix the screws otherwise loosely fixed screws may cause the product to fall or seperate while adjusting angle. 2 10 Adjusting Tilt Angle , 10 15 ~ . [. . . ]