User manual LG MA2130W

[. . . ] WARRANTY PERIOD: REFRIGERATOR/FREEZER LABOR: One Year from the Date of Purchase. PARTS: One Year from the Date of Purchase. SEALED SYSTEM (Compressor, Condenser, and Evaporator) LABOR: One Year from the Date of Purchase. PARTS: Seven years from the Date of Purchase. [. . . ] Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy. IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small pebblesized pieces. Use special care when removing them to avoid dropping them. Adjusting Shelves Remove shelves from the shipping position and replace shelves in the position you want. · To remove a shelf--Tilt up the front of the shelf in the direction of (1) and lift it in the direction of (2). w CAUTION: Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilling food. Sliding Out Shelves You can slide glass shelves in and out of your refrigerator as follows. · To slide the shelf out, carefully pull front of shelf toward you. · To slide shelf in, push shelf in until it stops. BOTTLE HOLDER Bottles can be stored laterally with this bottle holder. For each lattice, insert the lattice into middle tab in 1 (closed to glass cover) and pull the side of the cover to insert it. 2 3 1 21 USING YOUR REFRIGERATOR GLIDE`N'SERVE The Glide`N'Serve provides storage space with a variable temperature control that keeps the compartment colder than refrigerator. The drawer also features a self-opening lid that opens whenever the drawer is pulled open. This drawer can be used for large party trays, deli items, or beverages. Cold Temp Control Colder NOTE: DO NOT store lettuce or other leafy produce in this drawer. Cold · · · · · · · cauliflower cucumbers zucchinis apples corn oranges grapes Colder · · · · · steaks hard cheeses cold cuts bacon hot dogs Controls The control regulates the air temperature in the drawer. Set control level to Cold (print on surface) to provide normal refrigerator temperature. Use the Colder (print on surface) setting for meats or other deli items. NOTE: Cold air directed to the Glide`N'Serve can decrease refrigerator temperature. Refrigerator control may need to be adjusted. To remove Glide`N'Serve Tilt up the front on its closed position and pull straight out. w WARNING: Fruits and vegetables may be damaged at the coldest setting. If they are frozen, they can be broken and cause personal injury. MODULAR DOOR BIN The door bins are removable for easy cleaning and adjusting. To remove the bin, simply lift the bin up and pull straight out. [. . . ] Door left open. u Wait 24 hours after hook-up for ice production. See the Setting the Controls section on page 16. u Check to see if something is holding the door open. Smaller cube size level is selected. Water shutoff valve connecting refrigerator to water line may be clogged. [. . . ]