User manual LG MA6511B

[. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. · A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] - 37 Operation and settings TCP/IP Note: You should register the SMTP server on the Event server setting to set this function. > Statically set: Select this option when you set a fixed IP address, with this setting, specify the IP address, Subnet mask and default gateway manually. Subnet mask: Enter a subnet mask address. DNS server status > DNS server: Enter the Primary domain name server that translates the hostnames into IP address. > Secondary DNS server: Enter the Secondary DNS server address that backups the Primary DNS. · Save: Click this button to confirm the settings. IP address status > Automatically set with DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically. Notify to SMTP server, if IP address is changed: If you select this option, the user get a notification mail telling him that the IP of the IP device has changed. 38 Operation and settings DDNS This free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device using the URL, rather than an IP address. This also solves the problem of having a dynamic IP address. IP filtering The access of the IP addresses in the list are allowed or denied according to the choice made in the drop-down list of the Basic policy option. Administrator: Allows you to operate setup menus and to view live images. Power user: Use of the limited functions of the system (The Configuration menu is not allowed. A power user can use the Live View, PTZ control, OSD control and audio functions. Normal user: Provides the lowest level of access. Allows to view live images only. 3. 4. User list > Add the User You can register a new user with various access rights. Enter the new User ID and Password. 41 Operation and settings Custom user: The user can login and view the live stream image only when the "Enable anonymous login" option is checked to enable it. Anonymous > Enable anonymous login Check the box to enable anonymous user login - allows the user access for only viewing the live stream image. Maximum RTP stream connection > Maximum number of simultaneous stream connection: Set this number to limit the number of simultaneous stream connections. The connections depend on the stream configuration as shown in the following Maximum RTP stream connection by stream configuration. Note: Remember the password. > Edit the registered user You can change the password or authority. Choose the user ID and then click the [Edit] button. [. . . ] If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version. Video images may be noisy if you are using the camera in a very low light environment or the bit rate/ quality is set to very low values. Provide higher values for quality and support the surrounding environment with enough light. Audio condition · The client computer that is interacting with the camera needs to have a sound card that is functional to support speaker and microphone. [. . . ]