User manual LG MS-3045NB

[. . . ] 8 POWER ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 POWER OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PRINTER DRIVER SETTING SCREEN . . . . . . . . . . 38 PRINTING MULTIPLE PAGES ON ONE PAGE (N-Up Printing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 FITTING THE PRINTED IMAGE TO THE PAPER (Fit To Paper Size). . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Each tab contains scan settings for the scan menu. "Application Selection" area Select the start-up application here. "Show TWAIN setting screen when scanning" Checkbox You can select whether or not the TWAIN screen is shown. When the checkbox is selected, the TWAIN screen appears when scanning is executed to let you adjust the scanning conditions. "Scan Setup" area Set the scan conditions. 6 7 8 "OK" button Click to save your settings and exit the dialog box. "Cancel" button Click this button to exit the dialog box without making any changes to the settings. "Apply" button Click to save your settings without closing the dialog box. "Help" button Click this button to display the help file for Button Manager. Note Some applications may limit your choice of settings. 48 SCANNER FUNCTIONS BUTTON MANAGER SETTINGS Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button Manager settings, follow the steps below. For details on Button Manager settings, see Button Manager Help. "OUTLINE OF BUTTON MANAGER" (p. 48) 1 Right-click the Button Manager icon ( ) on the task bar, and select "Settings" from the pop-up menu. The setting screen of Button Manager will open. 4 5 Set up the "Colour Mode", "Edge" and other scan settings in the "Scan Setup" area. The inside of the frame that is created when you drag the mouse will be the scanning area. To cancel a specified scanning area and clear the frame, click anywhere outside the frame. "Rotate" button Click to rotate the preview image 90 degrees clockwise. This allows the orientation to be corrected without resetting the original. Upon scanning, the image file is created in the orientation shown in the preview screen. "Image Size" button Click to open a dialog box that allows you to specify the scanning area by entering numbers. Pixels, mm, or inches can be selected for the units of the numbers. By initially specifying a scanning area, numbers can be entered to change that area relative to the top left corner as a fixed origin. 4 "Auto Scan Area Judgement" button Click when the preview screen is displayed to automatically set the scanning area to the entire preview image. Click the "Auto Scan Area Judgement" button to automatically set the scanning area to the entire preview image. Preview image Preview screen 4 5 "Help" button Click to display the help file for the scanner driver. 53 SCANNER FUNCTIONS SCANNING FROM A WIA-COMPLIANT APPLICATION (Windows XP/Vista) If you are using Windows XP/Vista, you can use the WIA driver to scan from Paint and other WIA-compliant applications. The procedure for scanning using Paint is explained in the following. 1 Place the original that you wish to scan on the document glass/RSPF. For information on setting an original for scanning, refer to "SCANNING USING THE KEYS ON THE MACHINE" (p. 47). 3 Select the paper source and picture type, and click the "Preview" button. The preview image will appear. [. . . ] Use it as a guideline for replacing the toner cartridge. 1 Hold down the [Light] key ( the alarm indicators ( , , blink. ) until , , ) 2 Hold down the [Copy ratio display] key ( ) for more than 5 seconds. The approximate quantity of toner remaining will be indicated in the display as a percentage. ("100", "75", "50", "25", "10" is displayed. ) When the percentage is less than 10%, "LO" will be displayed. The display will show "- -". 3 Press the [Light] key ( the normal display. ) to return to The alarm indicators ( , , , , ) go off. The display returns to the number of copies display. 100 ROUTINE MAINTENANCE CLEANING THE DOCUMENT GLASS AND RSPF/DOCUMENT COVER If the document glass, underside of the document cover/RSPF, or the scanner for originals coming from the RSPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean. Stains or dirt on the document glass/RSPF will also be copied. [. . . ]