User manual LG MT-60PZ10

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] [Original] Refers to the original language in which the disc was recorded. [Other] To select another language, press numeric buttons and then b ENTER to enter the corresponding 4-digit number according to the language code list on the page 36. If you enter the wrong language code, press CLEAR. [Off (for Disc Subtitle)] Turns off Subtitle. Display Mode The Display Mode setting works only when the TV Aspect mode is set to 4:3. [Letterbox] This displays a wide screen picture with black bands at the top and bottom of the screen. [Panscan] This fills the entire 4:3 screen, cropping the picture as necessary. Progressive Scan (For Component Video connections) Selects whether the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off ]. If you set Progressive Scan to [On] in error, you must reset the unit. Next, press and hold Z for about five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. System Setting 21 AUDIO DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). If you forget your password, you can clear it using the following steps: 1. Press SETUP to display the [SETUP] menu. 2. Input the 6-digit number “210499” and press b ENTER. The password is cleared. Note , , Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 37. 1. Select [Area Code] on the [Lock] menu then press d. 3. Select the first character using w/s buttons. 4. Press d and select the second character using w/s buttons. 5. Press b ENTER to confirm your Area code selection. All the downloaded videos from DivX® VOD with this unit`s registration code can be played on this unit. Note , , 4 Operating Operating 23 Basic Operations Disc/USB Operations 1. Insert the disc by using the Disc tray or connect the USB device to the USB port. 2. Select the DVD/CD or USB function by pressing FUNCTION on the remote control or F on the unit. 3. Select a file (or track/ title) you want to play by pressing w/s/a/d. yy When playing a disc or USB Flash Drive containing with DivX, MP3/ WMA and JPEG files together, you can select menu of files which you would like to play by pressing MENU. yy For the most Audio CD and DVD-ROM discs, playback starts automatically. [. . . ] Point the remote control at the remote sensor of the unit. yy The remote control is too far from the unit. Operate the remote control within about 23 ft (7 m). The remote control does not work properly. [. . . ]