User manual LG MU-42PZ11

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] [YPbPr]: When your TV is connected with the COMPONENT / PROGRESSIVE SCAN OUTPUT jacks on the unit. Adjust the Disc playback settings ON REMOTE 1 Select the disc mode: 2 Display setup menu: 3 Select a desired option on the first level: 4 Move to second level: 5 Select a desired option on the second level: 6 Move to third level: 7 Change the setting: MODE SETUP vV B vV B v V / ENTER Adjust the audio settings Adjust the Disc playback settings - more you can do When you turn on for the first time (optional) The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. Dolby Digital / DTS / MPEG ­ Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS): Select this when you connect this unit's DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. (Frequency) ­ Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 KHz. [96 KHz]: The audio signals are output in their original format. Adjust the language settings Menu Language ­ Select a language for the Setup menu and on-screen display. 9 DV589H-E. BFRALLK_6716_ENG 1/26/10 7:45 PM Page 10 DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). Vocal ­ Set to [On] only when a multi-channel karaoke DVD is playing. [Important: DivX VOD content is protected by a DivX DRM (Digital Rights Management) system that restricts playback to registered DivX Certified devices. If you try to play DivX VOD content not authorized for your device, the message "Authorization Error" will be displayed and your content will not play. ] Learn more at www. divx. com/vod. REC Bitrate ­ You can choose a bit rate for USB direct recording (128 Kbps, 160 Kbps, 192 Kbps, 256 Kbps or 320 Kbps). Higher bit rate gives the better sound quality but uses more space on the USB Flash Drive. For USB direct recording see page 18. Adjust the DVB-T or DAB settings - more you can do Adjust the programmed channels Auto Scan ­ This option automatically scans and sets the available channels. Currently selected mode (TV or Radio) will not be changed after the Auto channel scanning. [Country]: Use b B select a country where you operate this unit. [Auto Scan]: Use V b B to select [Yes] then press ENTER to start the channel scanning. TV Channel / Radio Channel ­ Displays the TV or Radio channel list. Use B to select the [Select] then press ENTER to display the channel list. You can also display the channel list pressing CH LIST while in DVB-T or DAB mode. [. . . ] · You can set the recording speed pressing AUDIO during USB direct recording. - X1 Track: While normal speed recording, you can listen to the music. - X4 Track: While 4X speed recording, you can not listen to the music. 18 DV589H-E. BFRALLK_6716_ENG 1/26/10 7:45 PM Page 19 Using a USB Flash Drive You can play MP3/WMA/JPEG/DivX in the USB Flash Drive with version 2. 0/1. 1. Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. [. . . ]