User manual LG MV24AH

[. . . ] 4 Set Auto Tuning following screen instructions. ✎✎ If Input Source is not connected properly, programme registration may not work. ✎✎ Auto Tuning only finds programmes that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password. ❐❐To use Manual Tuning SETTINGS ➾ SETUP ➙ Manual Tuning Adjusts programmes manually and saves the results. [. . . ] • Edge Enhancer: Shows clearer and distinctive yet natural edges of the video. • Expert Pattern: Patterns used for expert adjustment • Colour Filter: Filters a specific colour spectrum in RGB colours to fine-tune colour saturation and hue accurately. • Colour Temperature: Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Gamma method, etc. • Colour Management System: This is a system that experts use when they adjust colour with a test pattern. They can select from six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow) without affecting other colours. For normal images, adjustments may not result in noticeable colour changes. ✎✎ Depending on input signal or other picture settings, the range of detailed items for adjustment may differ. ❐❐To reset picture settings SETTINGS ➾ PICTURE ➙ Picture Mode ➙ Picture Reset Resets picture settings that the user customizes. Select the picture mode you wish to reset. ❐❐To use Sound Mode SETTINGS ➾ AUDIO ➙ Sound Mode Adjusts TV audio to an optimal level according to a selected sound mode. ❐❐To manually adjust Sound Mode SETTINGS ➾ AUDIO ➙ Sound Mode ➙ Infinite Surround / Treble / Bass / Reset You can set minute options for each sound mode. First select a Sound Mode of your choice. • Infinite Surround: LG’s proprietary audio processing technology allows 5-channel-like surround sound from two speakers. ✎✎ If Clear Voice II is set to On, Infinite Surround will not be selected. Be sure to connect with an optical cable (sold separately) to use the HT Speaker function. ❓❓SIMPLINK function description • Direct Play: Plays the multimedia device on the TV instantly. • Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly. • Block Programme : Blocks programmes with content inappropriate for children. Programmes can be selected but the screen is blank and the audio is muted. To watch a locked programme, enter the password. • Parental Guidance : This function operates according to information from the broadcaster. Therefore if the signal has incorrect information, this function does not operate. Prevents children from watching certain adult TV programmes according to the ratings limit set. Enter a password to watch a blocked programme. • Input Block : Block the input sources. ❐❐To use Key Lock SETTINGS ➾ LOCK ➙ Key Lock Locks control buttons on TV. ✎✎ Key Lock function remains intact even in case of power outage or when the power cord is removed from the wall socket. ✎✎ Key Lock function can only be set by remote control, and not by the button on the TV. [. . . ] There may be no malfunction. ❐❐Operational problems ꕢꕢ Cannot view certain programmes. • Adjust the location or orientation of the antenna. • Save the programmes you wish to view using Auto Tuning or Programme Edit. ꕢꕢ There is a delay after the TV is switched on before the image is fully visible. • This is normal. Any delay is due to an image deletion process which cleans up image noise that may occur when the TV is first switched on. ❐❐Image problems SETTINGS ➾ Customer Support ➙ Picture Test Run an Picture Test first to verify that the image signal output is normal. If there is no problem with the test image, check connected external devices and the broadcast signal. [. . . ]