User manual LG N1642W

[. . . ] User's Guide Network Monitor N1642W N1941W Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Accessories !!!Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord (Depending on the country) 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this product before shipping out. ) IMPORTANT This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, LAN cable) with ferrite cores to maintain standard compliance for the product. Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. [. . . ] Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Connecting the Display Using the Monitor 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 . 1 Connect peripheral devices 2 Connect LAN Cable (X550 port) Analog signal Wall-outlet type (Make sure to connect X550 port, not LAN port of PC) X550 port Keyboard/Mouse Input LAN cable should be connected before booting PC. (This item must be purchased separately. ) Up to 5 ports are supported per X550 PCI Card. Up to 5 ports can be connected if necessary. (This item must be purchased separately. ) Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume. It is recommended to use a PS/2-type keyboard/mouse. To use the monitor keyboard/mouse properly, it must be connected to the PC. Applications that require other than 16 bit color quality and the set resolution are not supported. When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2. Press button on the front switch panel to turn the power on. A8 Connecting the Display NOTE LAN Cable -For the LAN cable, it is recommended to use SFTP(recommend : 6m, max : 10m) provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used. -To achieve good image quality, avoid using UTP and STP cables. -You must use a direct LAN cable, not a crossover one. Both connections should be same colors. Do not connect any kind of network devices. Core The ferrite core can be used to reduce electromagnetic waves when connecting a LAN cable. As shown in the image below, fit the ferrite core to the LAN cable. The ferrite core needs to be separated from the mold by 5 centimeters. You can purchase SFTP(recommend : 6m, max : 10m)LAN cables and cores through LG additionally. A9 Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again. If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while the PC is in operation, the device may not work properly. Make sure that the power is turned off when disconnecting/connecting a peripheral device. [. . . ] If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. G On the screen background, vertical bars or stripes are visible. · Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. · Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. [. . . ]