User manual LG N1941WP

[. . . ] User's Guide Network Monitor N1642W N1642WP N1941W N1941WP N1941WE Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. With LG Network Monitor, some PC programs may not be compatible or need to be modified due to different kind of operation. Please check the compatibility in advance, before purchasing or installing the software. LG do not have any kind of legal liability on this matter. Accessories !!! [. . . ] This rear view represents a general model; your display may differ from the view as shown. 1. A Connect D-sub(RGB Analog) Cable (PC) B Connect D-sub(RGB Analog) Cable (Mac) Analog signal Wall-outlet type Mac adapter (This item must be purchased separately. ) For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Connecting the Display Using the Monitor 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 . 1 Connect peripheral devices 2 Connect LAN Cable (X550 port) Analog signal Wall-outlet type (Make sure to connect X550 port, not LAN port of PC) X550 port Keyboard/Mouse Input LAN cable should be connected before booting PC. (This item must be purchased separately. ) Up to 5 ports are supported per X550 PCI Card. Up to 5 ports can be connected if necessary. (These items are not included for all models. ) Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume. It is recommended to use a PS/2-type keyboard/mouse. To use the monitor keyboard/mouse properly, it must be connected to the PC. Applications that require other than 16 bit color quality and the set resolution are not supported. When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2. Press button on the front switch panel to turn the power on. A8 Connecting the Display NOTE LAN Cable -For the LAN cable, it is recommended to use SFTP(recommend : 6m, max : 10m) provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used. -To achieve good image quality, avoid using UTP and STP cables. -You must use a direct LAN cable, not a crossover one. Both connections should be same colors. Do not connect any kind of network devices. Core The ferrite core can be used to reduce electromagnetic waves when connecting a LAN cable. As shown in the image below, fit the ferrite core to the LAN cable. The ferrite core needs to be separated from the mold by 5 centimeters. You can purchase SFTP(recommend : 6m, max : 10m)LAN cables and cores through LG additionally. 50 10mm 50 10mm A9 Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again. [. . . ] If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. G On the screen background, vertical bars or stripes are visible. · Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. · Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. [. . . ]